Abstract:With the development of minimally invasive treatment technology, coronary stents made of corrosion-resistant steel are in demand for restoring the patency of blood vessels. The effectiveness of coronary stenting depends on various factors, but the quality of the surface of the stents is a major factor. The higher the quality of the surface of the stent is, the less negative the effect on the circulatory system, arterial walls, and the higher the biocompatibility of the stent is. The complex shape, small cross-section, size, and low rigidity of coronary stents are the main reasons for the inability to ensure high surface quality using mechanical finishing methods. Therefore, electrochemical methods are used to polish stents. For electrochemical polishing (ECP) of stents, an electric mode based on direct current is traditionally used. The disadvantages of direct current ECP are excessive metal removal and the need to use electrolytes of complex compositions, often containing toxic components. As an alternative to the traditional ECP with the use of direct current, we have proposed a method of pulsed ECP using pulses of microsecond duration for polishing stents. The use of pulsed current allows one to achieve a significant increase in the efficiency of the SEC process, when, due to the localization of the anodic dissolution, the smoothing speed of the microroughness of the treated surface, referred to the total metal removal, increases significantly. The paper presents a comparative analysis of ECP modes using direct and pulse current to change the surface roughness, removal, radius of curvature of the edges, and corrosion resistance on the example of stents made of the 316LVM stainless steel. Based on the results of the studies, technological regimes of pulsed ECP were established that provide the highest quality polishing of the stent surface with a small metal removal with a slight rounding of the edges.

Effect of Electropolishing of Metals and Alloys in a Deep Eutectic Solvent on Their Corrosion Characteristics

Comparison of Electropolishing of Aluminum in a Deep Eutectic Medium and Acidic Electrolyte

The effect of anodic polarization parameters of 316L steel in a propylene glycol: Choline chloride eutectic solvent on surface finishing, chemistry and corrosion resistance

Advantages of Electrochemical Polishing of Metals and Alloys in Ionic Liquids

Electropolishing of single crystal and polycrystalline aluminum to achieve high optical and mechanical surfaces

Plasma Electrolytic Polishing-An Ecological Way for Increased Corrosion Resistance in Austenitic Stainless Steels

Electrochemical Polishing of Austenitic Stainless Steels

Using the Ethaline Electropolishing Method on the Internal Surface of Additive Manufactured Tubes

Electrochemical Polishing of 7075 Al Alloy in Phosphoric Acid

Electrochemical Polishing of Ti and Ti6Al4V Alloy in Non-Aqueous Solution of Sulfuric Acid

Anodic surface treatment of nickel in eutectic ionic liquids based on choline chloride for electrochemical polishing and enhancement of electrocatalytic activity in hydrogen evolution reaction

Effect of Polishing on Electrochemical Behavior and Passive Layer Composition of Different Stainless Steels

Corrosion behaviour of electropolished magnesium materials

Effect of Pre-treatment on Roughness and Hydrophobicity of Electro-Etched Steel with Improved Corrosion Resistance

Electropolishing of 316L Stainless Steel for Anticorrosion Passivation

Electrochemical polishing versus mechanical polishing of AISI 304: surface and electrochemical study

Electropolishing with Low Mass Loss for Additive Manufacturing of Ti6Al4V in Zinc Chloride-Urea Deep-Eutectic Solvent

On the Optimization of Roughness and Corrosion Resistance of Laser Beam Powder Bed Fusion Fabricated Ti–6Al–4V Parts—An Electrochemical Approach

Dry electrochemical polishing of copper alloy in a medium containing ion-exchange resin

Electrochemical polishing of matrix stents of the 316LVM steel using microsecond pulses