Abstract:Electrolytic manganese residue (EMR) is a solid filter residue obtained from manganese carbonate ore during the production of metal manganese. A potential avenue towards large-scale utilisation of EMR is its use in cement preparation. However, the preparation of cement materials using EMR requires high-temperature calcination. In this study, the thermal properties and pyrolysis kinetics of belite–calcium sulfoaluminate cement raw meal were systematically studied using a multiple-heating-rate method based on thermogravimetric analysis and a kinetic model. The kinetic and thermodynamic parameters was studied using non-isothermal Flynn–Wall–Ozawa (FWO), Kissinger–Akahira–Sunose (KAS), Friedman and Kissinger methods. The results showed that from 30 to 1300°C, the pyrolysis reaction of cement raw meal was mainly divided into four steps: the crystalline water removal from calcium sulphate dihydrate and bauxite, the ammonia nitrogen removal from ammonium salts and the calcium sulphate crystal transformation; the decomposition of calcium carbonate and carbon-containing organic matter; the sulphate and carbonate substance decomposition and the clinker mineral phase formation. The average activation energies calculated when using the non-isothermal FWO, KAS, Friedman and Kissinger methods were 244.49, 240.7, 239.24 and 380.60 kJ/mol and the average pre-exponential factors were 1.75 × 10 20 , 3.65 × 10 20 , 7.11 × 10 21 and 1.55 × 10 13 s −1 , respectively. Herein, the pyrolysis kinetics of the cement raw meal was divided into two main stages: In stage 1 ( α : 0.15–0.8, 524°C–754°C), the mechanism of P2/3 accelerated nucleation in the Mampel Power rule, and the reaction mechanism function was G( α )= α 3/2 . In stage 2 ( α : 0.80–0.95, 754°C–1165°C), during the local conversion of α = 0.2–0.8, when α was <0.5, the chemical reaction mechanism of the R3 phase boundary was noted and the mechanism function was G( α ) = 1 − (1− α ) 1/3 ; however, when α was >0.5, a random nucleation and subsequent growth mechanism of A6 was noted and the mechanism function was G( α ) = [−ln(1 − α )] 2/3 .

Preparation of activated electrolytic manganese residue-slag-cement ternary blended cementitious material: Hydration characteristics and carbon reduction potential

Investigation on sulfate activation of electrolytic manganese residue on early activity of blast furnace slag in cement-based cementitious material

Study of microscopic properties and heavy metal solidification mechanism of electrolytic manganese residue-based cementitious materials

Mechanical properties and environmental characteristics of the synergistic preparation of cementitious materials using electrolytic manganese residue, steel slag, and blast furnace slag

Study on the Alkali–Sulfur Co-Activation and Mechanical Properties of Low-Carbon Cementitious Composite Materials Based on Electrolytic Manganese Residue, Carbide Slag, and Granulated Blast-Furnace Slag

Synergistic Activation Mechanism and Long-Term Properties of a Solid Waste Cementitious Materials Based on Red Mud and Calcium Carbide Slag

Characteristic contaminant removal purification and high value ecological utilization technology of calcination modified manganese residue

Preparation of Cementitious Materials from Mechanochemically Modified Copper Smelting Slag Compounded with High-Aluminum Fly Ash

Preparation and Mechanical Performance of Supplementary Cementing Materials Cementitious by Electroplating Sludge

Experimental Study Based on Box–Behnken Design and Response Surface Methodology for Optimization Proportioning of Activated Lithium Slag Composite Cement-Based Cementitious Materials

Study on the Performance and Mechanism of Cement Solidified Desulfurization Manganese Residue

Utilization of ground granulated blast-furnace slag and electrolytic manganese residue as a low-carbon cementitious material

The Use of Slag and Red Mud for the Synthesis of a Slag-Based Cementitious Material

Influence of Mechanically Activated Silico-Manganese Slag on Hydration and Properties Development of Blended Cement

Effect of Electrolytic Manganese Residue in Fly Ash-Based Cementitious Material: Hydration Behavior and Microstructure

Kinetic and thermodynamic analysis on preparation of belite-calcium sulphoaluminate cement using electrolytic manganese residue and barium slag by TGA

Preparation and Hydration Mechanisms of Low Carbon Ferrochrome Slag-Granulated Blast Furnace Slag Composite Cementitious Materials

Utilization of Copper–Molybdenum Tailings to Enhance the Compressive Strength of Alkali-Activated Slag-Fly Ash System

Utilizing desulphurized electrolytic-manganese residue as a mineral admixture: A feasibility study

Sustainable Utilization of Waste Oyster Shell Powders with Different Fineness Levels in a Ternary Supplementary Cementitious Material System

Evaluation of the early strength of limestone-slag-cement ternary composite mortar improved by aluminum sulfate