Abstract:Electrolytic manganese residue (EMR) is a solid filter residue obtained from manganese carbonate ore during the production of metal manganese. A potential avenue towards large-scale utilisation of EMR is its use in cement preparation. However, the preparation of cement materials using EMR requires high-temperature calcination. In this study, the thermal properties and pyrolysis kinetics of belite–calcium sulfoaluminate cement raw meal were systematically studied using a multiple-heating-rate method based on thermogravimetric analysis and a kinetic model. The kinetic and thermodynamic parameters was studied using non-isothermal Flynn–Wall–Ozawa (FWO), Kissinger–Akahira–Sunose (KAS), Friedman and Kissinger methods. The results showed that from 30 to 1300°C, the pyrolysis reaction of cement raw meal was mainly divided into four steps: the crystalline water removal from calcium sulphate dihydrate and bauxite, the ammonia nitrogen removal from ammonium salts and the calcium sulphate crystal transformation; the decomposition of calcium carbonate and carbon-containing organic matter; the sulphate and carbonate substance decomposition and the clinker mineral phase formation. The average activation energies calculated when using the non-isothermal FWO, KAS, Friedman and Kissinger methods were 244.49, 240.7, 239.24 and 380.60 kJ/mol and the average pre-exponential factors were 1.75 × 10 20 , 3.65 × 10 20 , 7.11 × 10 21 and 1.55 × 10 13 s −1 , respectively. Herein, the pyrolysis kinetics of the cement raw meal was divided into two main stages: In stage 1 ( α : 0.15–0.8, 524°C–754°C), the mechanism of P2/3 accelerated nucleation in the Mampel Power rule, and the reaction mechanism function was G( α )= α 3/2 . In stage 2 ( α : 0.80–0.95, 754°C–1165°C), during the local conversion of α = 0.2–0.8, when α was <0.5, the chemical reaction mechanism of the R3 phase boundary was noted and the mechanism function was G( α ) = 1 − (1− α ) 1/3 ; however, when α was >0.5, a random nucleation and subsequent growth mechanism of A6 was noted and the mechanism function was G( α ) = [−ln(1 − α )] 2/3 .

Kinetic and thermodynamic analysis on preparation of belite-calcium sulphoaluminate cement using electrolytic manganese residue and barium slag by TGA

Synergistic use of electrolytic manganese residue and barium slag to prepare belite- sulphoaluminate cement study

Preparation of activated electrolytic manganese residue-slag-cement ternary blended cementitious material: Hydration characteristics and carbon reduction potential

Study of microscopic properties and heavy metal solidification mechanism of electrolytic manganese residue-based cementitious materials

Investigation on sulfate activation of electrolytic manganese residue on early activity of blast furnace slag in cement-based cementitious material

Mechanical properties and environmental characteristics of the synergistic preparation of cementitious materials using electrolytic manganese residue, steel slag, and blast furnace slag

Low-Temperature Calcination of Belite-Calcium Sulphoaluminate Cement Clinker and the Hydration Process

Hazard-Free Treatment of Electrolytic Manganese Residue and Recovery of High-Concentration SO2 Using High-Temperature Reduction Roasting Process

Hydrothermal synthesis and characterization of alkali-activated slag-fly ash-metakaolin cementitious materials

Investigations on phase constitution, mechanical properties and hydration kinetics of aluminous cements containing magnesium aluminate spinel

Study on the Alkali–Sulfur Co-Activation and Mechanical Properties of Low-Carbon Cementitious Composite Materials Based on Electrolytic Manganese Residue, Carbide Slag, and Granulated Blast-Furnace Slag

SYNTHESIS AND CHARACTERIZATION OF HIGH BELITE SULFOALUMINATE CEMENT THROUGH RICH ALUMINA FLY ASH AND DESULFURIZATION GYPSUM

Hydration kinetics of C3A: effect of lithium, copper and sulfur-based mineralizers

Study on the Performance and Mechanism of Cement Solidified Desulfurization Manganese Residue

Synthesis of high belite sulfoaluminate cement with high volume of mixed solid wastes

Calorimetric Study of Calcium Aluminate Cement Blended with Flue Gas Desulfurization Gypsum

Influence of Mechanically Activated Silico-Manganese Slag on Hydration and Properties Development of Blended Cement

Preparation of Sulphoaluminate Cement Clinkers from Wet Flue Gas Desulphurized Slag

Thermodynamic modelling of cements clinkering process as a tool for optimising the proportioning of raw meals containing alternative materials

Characteristic contaminant removal purification and high value ecological utilization technology of calcination modified manganese residue

Incorporation and solidification mechanism of manganese doped cement clinker