Abstract:Cementitious materials composed entirely of solid waste are expected to replace cement and alleviate environmental pollution problems. Due to limitations in reaction rate and strength, a composite activator comprising NaOH and water glass was employed to investigate the effect of composite activator content (0–12.0% Na2O equivalent) on pore solution pH, hydration products, microscopic morphology, and pore structure of ternary alkali-activated materials prepared by blast furnace slag, desulfurization gypsum and carbide slag. Additionally, the microstructure development results were corroborated through characterization of fluidity, setting time and compressive strength. Results indicate that the reaction process of alkali-activated material accelerates as Na2O equivalent increases from 0 to 8.0%, thereby promoting calcium aluminum silicate gel and hydrotalcite formation, and facilitating the continuous filling of pores, which leads to a dense structure formation. However, excessive gel products are generated on bonded particle surface when Na2O equivalent exceeds 8.0%, hindering polymerization process; meanwhile, the presence of microcracks leads to an increase in macropores (≥10 mm3) proportion resulting in a decrease in compressive strength. Notably, the increase in Na2O equivalent gradually suppresses ettringite formation. Life cycle assessment demonstrates that the preparation of mortar is more environmentally sustainable. Based on the optimal compressive strength, the reduction in global warming, abiotic resource depletion, acidification, and eutrophication potential of mortar compared with cement is 78.7%, 39.7%, 17.9% and 29.2%, respectively. This work contributes to further improving the resource utilization of solid waste, and extending the application of conventional solid waste cementitious materials in the domain of emergency repair engineering.

Performance Enhancement of Alkali-Activated Electric Arc Furnace Slag Mortars through an Accelerated CO2 Curing Process

Accelerating the Reaction Kinetics of Na2CO3-Activated Slag Mortars by Calcined Recycled Concrete Fines

Long-Term Performance and Durability of Heat-Treated Alkali-Activated Slag Mortar Containing Silica Fume

Mechanical Performance and Durability of Mortar Based on Slag Cement and NaOH-Activated Slag

Effect of Alkaline-Earth Metal Oxide on Compressive Strength and Flexural Strength of Alkali-Activated Slag Cement Mortar

Effect of activator concentration on setting time, workability and compressive strength of sustainable concrete with alkali-activated slag binder

Experimental and Statistical Study on the Properties of Basic Oxygen Furnace Slag and Ground Granulated Blast Furnace Slag Based Alkali-Activated Mortar

Application of electric arc furnace slag as an alternative precursor to blast furnace slag in alkaline cements

Silicomanganese fume-based alkali-activated mortar: experimental, statistical, and environmental impact studies

Recycling electric arc furnace slag through tailoring of ambient-cured alkali-activated mortar mix using hybrid AHP-GRA and TOPSIS

Accelerated carbonation of steel slag for enhanced carbon capture and utilization as aggregate in alkali-activated materials

Design of Inorganic Polymer Mortar from Ferricalsialic and Calsialic Slags for Indoor Humidity Control

The Influence of CaO and MgO on the Mechanical Properties of Alkali-Activated Blast Furnace Slag Powder

Influence of Silica Fume Additive and Activator Ratio on Mechanical Properties in Slaked Lime-Based Alkali-Activated Mortars

Microstructures and properties of alkali-activated slags with composite activator: Effects of Na2O equivalents

Approaches to enhance the carbonation resistance of fly ash and slag based alkali-activated mortar- experimental evaluations

Parameter Study of Metakaolin/ Blast Furnace Slag-Based Alkali-Activated Materials

Microstructure, strength development mechanism, and CO2 emission analyses of alkali-activated fly ash-slag mortars

Strength formation mechanism and curing system optimization of low-carbon cementitious materials prepared by synergistic activation of multiple alkaline solid wastes

Effect of Carbonation Treatment on the Strength and CO2 Uptake Rate of Composite Cementitious Material with a High Steel Slag Powder Content

Synergetic effect of a chemical activator and blast-furnace slag on enhancing recycled aggregate mortar