Abstract:Thermoelectric (TE) materials-based devices are useful in converting heat into electricity. The cost of thermoelectric materials is mainly incurred from the purified pure metals used to make the efficient TE device. In the current study, tetrahedrite materials are considered due to their low cost, as these materials are abundant in mining waste of copper ores and also the most extensive sulfosalt on earth. Hence, to add value addition to mine waste materials, the composite approach has been employed to integrate the natural tetrahedrite (mine waste/tailings product) materials with synthetically developed tetrahedrite materials in the lab for the current investigation. Further, the optimum quantity of mine waste addition is optimized by the systematic investigation of TE performance with varying the mine waste percentage addition to the synthetic tetrahedrite. The p-type synthetic Cu 10 FeZnSb 4 S 13 (Sample-A) tetrahedrite compound and 70 (Cu 10 FeZnSb 4 S 13 ) + 30 (natural/mine waste) (Sample-B) have been synthesized employing hot-press at 773 K along with the pristine (Cu 10 Fe 2 Sb 4 S 13 ) tetrahedrite compound. Moreover, the Seebeck coefficient is increased by 36 % (220 μV/K to 300 μV/K) for Sample-B, as compared to sample A and it is ∿ 2 times higher as compared to the pristine compound. The power factor is increased by ∿ 3 times that of the Sample-A (0.05 mW/mK 2 to 0.15 mW/mK 2 ). In addition, the thermal conductivity of Sample-B compound was further reduced by 30 % than Sample-A (0.98 W/mK to 0.69W/mK) and ∿ 44 % more than the pristine compound. Finally, the zT of Sample-B increased to almost 3 times than Sample-A (0.05–0.15).

Thermoelectric Cu 12 Sb 4 S 13 ‐Based Synthetic Minerals with a Sublimation‐Derived Porous Network

Thermoelectric Cu12 Sb4 S13 -Based Synthetic Minerals with a Sublimation-Derived Porous Network.

Microstructure and thermoelectric properties of porous Bi 2 Te 2.85 Se 0.15 bulk materials fabricated by semisolid powder processing

Enhanced thermoelectric performance of n -type PbTe bulk materials fabricated by semisolid powder processing

Enhancing thermoelectric properties of p-type (Bi,Sb)2Te3 via porous structures

Highly stabilized thermoelectric performance in natural minerals

High thermoelectric performance realized in porous Cu1.8S based composites by Na2S addition

Designing Cost-Performance Porous Thermoelectric Materials by Interface Engineering Through Atomic Layer Deposition

Enhanced thermoelectric performance of Bi<sub>2-x</sub>Cu<sub>x</sub>S<sub>3</sub> by hydrothermal synthesis and spark plasma sintering

Enhanced thermoelectric performance of Bi2-xCuxS3 by hydrothermal synthesis and spark plasma sintering

CuPbBi<sub>5</sub>S<sub>9</sub> thermoelectric material with an intrinsic low thermal conductivity: Synthesis and properties

Enhanced performance of thermoelectric nanocomposites based on Cu12Sb4S13 tetrahedrite

High thermoelectric performance enabled by convergence of nested conduction bands in Pb7Bi4Se13 with low thermal conductivity

Augmentation in the thermoelectric performance by integrating the natural minerals with synthetic tetrahedrite compounds

Boosting thermoelectric performance in Cu3SbS4-based compounds through incorporating SiC nanoparticles

ZnO-Nanoparticle-Dispersed Cu11.5Ni0.5Sb4S13−δ Tetrahedrite Composites with Enhanced Thermoelectric Performance

Dense twin and domain boundaries lead to high thermoelectric performance in Sn-doped Cu 3 SbS 4

Excellent thermoelectric properties and stability realized in copper sulfides based composites via complex nanostructuring

Suppressed lattice thermal conductivity in porous compounds for high-performance thermoelectric applications

Enhancing thermoelectric and mechanical properties of p-type Cu3SbSe4-based materials via embedding nanoscale Sb2Se3

Enhanced thermoelectric performance of BiCuSeO through composite structuring with Pb-and La-doped components