Abstract:During plastic deformation of granular materials due to loading, the stress-strain and strength characteristics of sand grains are influenced with grain size, their distribution and packing. Also the macroscopic behaviour of granular materials changes with the variation of microscopic behaviour. Particle size is one of the important properties which plays a dominant role on the stress, strain and strength responses of granular materials. Alteration of grain size results in the change of void ratio as well as particle effective contact area revolutionized and the load distribution mechanism of particle to particle contact. To evaluate the effect of particle size, a series of direct shear tests were performed considering uniform particles of eight samples (0.075, 0.15, 0.212, 0.300, 0.600, 1.18, 1.72 and 2.76 mm) and graded particles of two samples (0.075-1.18 mm and 0.075-2.36 mm). Three types of normal loads (0.05, 0.10 and 0.15 kN) were selected for each test. For uniform particles, particles retained on individual sieve size were considered and in graded particles combination of each uniform particle pondered. A theoretical approach was also proposed to correlate the particle size and macroscopic response. From the experimental results, it was observed that for each set of normal load with the increase of particle size ,angle of internal friction as well as maximum horizontal shear stress increases for uniform sands and a similar response was noticed in graded sands but the larger the gradation the higher the shear strength. Maximum horizontal shear and angle of internal friction with respect to particle size is also influenced by normal stress. Experimental results have good agreement with the theoretical approach.

Effect of particle size on the anisotropic shear behavior of sand-textured geomembrane interface

Signature of Anisotropy in Liquefiable Sand under Undrained Shear

Effect of particle gradation on static and dynamic direct shear properties of geogrid-sand interface

Effects of direct shear characteristics of sand-geogrid interface under different aperture ratios

Effects of Pore Fluid and Surface Roughness on Geomembrane - Soil Interface Behavior

Geomembrane Coefficients of Interface Friction

Determination of the Effect of Soil Particle Size Distribution on the Shear Behavior of Sand

Microscale geomembrane-granular material interactions

Cyclic and post-cyclic shear behavior of sand-geogrid interface under different shear rates

Particle size effects on coarse soil-geogrid interface response in cyclic and post-cyclic direct shear tests

Effect of Particle-Size Gradation on Coarse Sand-Geotextile Interface Response in Cyclic and Postcyclic Direct Shear Test

Sand-Steel Interface Behaviour Under Large-Displacement And Cyclic Shear

Integrated Digital Image Analyses for Understanding the Particle Shape Effects on Sand–Geomembrane Interface Shear

Effects of Grain Size and Moisture Content on the Strength of Geogrid-Reinforced Sand in Direct Shear Mode

Dynamic Shear Behavior of Interface for Clay Reinforced with Geogrid Encapsulated in Thin Layers of Sand

Effect of aperture ratio on the cyclic shear behaviour of aggregate-geogrid interfaces

Influence of micro and macroroughness of geomembrane surfaces on soil-geomembrane and geotextile-geomembrane interface strength

Peak Friction Behavior of Smooth Geomembrane-Particle Interfaces

Influence of soil particle size on monotonic and cyclic direct shear behaviors of geogrid-soil interface

Effect of Particle Size on the Shear Strength Behavior of Sands

Microanalysis of smooth Geomembrane–Sand interface using FDM–DEM coupling simulation