Abstract:Huge and critical structures, such as fuel storage tanks and nuclear power plants, are often built on dense sandy grounds, which may cause excessive plastic deformations under multidirectional cyclic shearing conditions caused by earthquakes. The lack of investigation of sand behavior under multidirectional loading may lead to unsafe designs, and thus significantly increase the maintenance cost for infrastructures during their long operational time, which might be longer than 100 years. This study presents a numerical investigation on the liquefaction behavior of dense sand under bidirectional cyclic simple shear using the discrete element method. The bidirectional cyclic simple shear tests with varying stress trajectories on the deviatoric stress plane, including figure-8, circular, and straight lines, were conducted. Additionally, a series of unidirectional loading tests was conducted in the simulation scheme for comparison purposes. The effect of the initial static shear on the cyclic behavior and liquefaction resistance of granular materials was examined. Four loading categories, including full reversal, partial reversal, intermediate reversal, and no reversal, were implemented in the numerical simulations. Although the presence of the initial static shear may enhance the cyclic resistance of granular samples under unidirectional loading, it mitigates the liquefaction resistance and promotes the failure of specimens under bidirectional shearing conditions. The microscopic analysis was performed to reveal the relationship between the fabric evolution and external loading, which can provide profound insights into the underlying mechanism of the cyclic behavior and liquefaction susceptibility of granular material when both the bidirectional shearing and initial static shear effects are considered.

Signature of Anisotropy in Liquefiable Sand under Undrained Shear

Discrete-Element Simulation of Dense Sand under Uni- and Bidirectional Cyclic Simple Shear Considering Initial Static Shear Effect

Bimodal Character of Induced Anisotropy in Granular Materials under Undrained Shear

Failure Mechanisms of Sand under Asymmetrical Cyclic Loading Conditions: Experimental Observation and Constitutive Modelling

Cyclic Flow Behavior of Anisotropically Consolidated Sand with a Small Amount of Fines

Discrete Element Modeling of Sand Behavior in a Biaxial Shear Test

Hypoplastic Modeling of Anisotropic Sand Behavior Accounting for Rotation of Principal Stress Direction

Impact of Static Preshearing on Undrained Anisotropy and Shear Characteristics of Sand

Energy-based Assessment of Cyclic Liquefaction Behavior of Clean and Silty Sand under Sustained Initial Stress Conditions

Undrained Behavior of Sand under Cyclic Paths That Match Storm-Wave Loading Conditions

Undrained Anisotropy and Rotational Shear in Granular Soil

Undrained shear behavior of silty sand with a constant state parameter considering initial stress anisotropy effect

Liquefaction resistance of anisotropically consolidated sand under monotonic and cyclic undrained torsional shear

Comparison of Cyclic Liquefaction Behavior of Clean and Silty Sands Considering Static Shear Effect

Experimental Study on Asymptotic Behaviour of Anisotropic Sand

Static liquefaction of sands under multiaxial loading

Effect of Particle Shape on the Liquefaction Resistance of Calcareous Sands

Flow Liquefaction Potential of Loose Sand: Stress Path Envelope and Energy-Based Evaluation

Coupled effects of particle overall regularity and sliding friction on the shear behavior of uniformly graded dense sands

Effect of Anisotropic Stress State on Elastic Shear Stiffness of Sand–Silt Mixture

Anisotropic behaviors of calcareous sand dependent on loading direction and initial shear stress