Abstract:Stress-induced anisotropy in calcareous sand can cause an uneven displacement in island reef engineering. In this study, stiffness, as a quantitative indicator, is explored to reveal the stress-induced anisotropy in calcareous sand. Based on the discrete element method, the stiffness anisotropic characteristics of calcareous sand during shearing, as well as the impact of particle breakage, are investigated by numerical simulations. Both the macro and micro responses, i.e., the maximum shear modulus, contact normal, strong and weak contact normal force, and the direction of particle breakage, are explored for calcareous sand with different particle breakage ratios. The results show that calcareous sand exhibits notable anisotropy during shearing, with the maximum shear modulus in the vertical direction (deviatoric stress direction) being significantly greater than that in the horizontal direction. Moreover, the higher the particle breakage rate, the lower the stiffness and its anisotropy. The micro-mechanism results indicate that the primary particle breakage during the shearing process occurs in the vertical direction. That is, the particle breakage weakens the strong contact force in the vertical direction, leading to a redistribution of the strong contact forces from the vertical direction to other directions. This redistribution mainly manifests in a decrease in the anisotropy of contact normal and contact vector within the sample, as well as a decrease in the proportion of strong contact forces in the overall contacts. This, in turn, reduces the shear strength and stiffness of calcareous sand, particularly in the vertical direction, and results in a decrease in the maximum shear modulus and its anisotropy. The maximum reduction can be up to 50% of the original value. These insights can provide a certain theoretical support for the uneven displacement and long-term stability of calcareous sand for islands and reefs.

Anisotropic behaviors of calcareous sand dependent on loading direction and initial shear stress

Signature of Anisotropy in Liquefiable Sand under Undrained Shear

Hypoplastic Modeling of Anisotropic Sand Behavior Accounting for Rotation of Principal Stress Direction

Discrete-Element Simulation of Dense Sand under Uni- and Bidirectional Cyclic Simple Shear Considering Initial Static Shear Effect

Failure Mechanisms of Sand under Asymmetrical Cyclic Loading Conditions: Experimental Observation and Constitutive Modelling

Impact of Static Preshearing on Undrained Anisotropy and Shear Characteristics of Sand

Stiffness Anisotropy and Micro-Mechanism of Calcareous Sand with Different Particle Breakage Ratios Subjected to Shearing Based on DEM Simulations

The role of incremental stress ratio in mechanical behavior and particle breakage of calcareous sand

Study on shear characteristics of calcareous sand with different particle size distribution

Experimental study of the mechanical behavior of calcareous sand under repeated loading-unloading

Experimental investigation on mechanical behavior and particle crushing of calcareous sand retrieved from South China Sea

Micro-and macro-mechanical behavior of crushable calcareous sand in South China Sea

Experiment Study on Anisotropy Sands Subjected to Rotation of Principal Stress Axes

Experimental Study on Asymptotic Behaviour of Anisotropic Sand

Small-strain shear modulus of calcareous sand under anisotropic consolidation

Undrained shear behavior of silty sand with a constant state parameter considering initial stress anisotropy effect

Behavior of Anisotropic Mica Sand under Fixed Principal Stress Axes Drained Shear Test

Effect of Initial Consolidation Stress Path on Shear Behavior of Calcareous Sand

Mechanical behavior and particle breakage of calcareous sand in triaxial test

Long-term behaviour and degradation of calcareous sand under cyclic loading

Experiment Study on the Influence of Density and Confining Pressure on Triaxial Shear Properties of Calcareous Sand