Abstract:Huge and critical structures, such as fuel storage tanks and nuclear power plants, are often built on dense sandy grounds, which may cause excessive plastic deformations under multidirectional cyclic shearing conditions caused by earthquakes. The lack of investigation of sand behavior under multidirectional loading may lead to unsafe designs, and thus significantly increase the maintenance cost for infrastructures during their long operational time, which might be longer than 100 years. This study presents a numerical investigation on the liquefaction behavior of dense sand under bidirectional cyclic simple shear using the discrete element method. The bidirectional cyclic simple shear tests with varying stress trajectories on the deviatoric stress plane, including figure-8, circular, and straight lines, were conducted. Additionally, a series of unidirectional loading tests was conducted in the simulation scheme for comparison purposes. The effect of the initial static shear on the cyclic behavior and liquefaction resistance of granular materials was examined. Four loading categories, including full reversal, partial reversal, intermediate reversal, and no reversal, were implemented in the numerical simulations. Although the presence of the initial static shear may enhance the cyclic resistance of granular samples under unidirectional loading, it mitigates the liquefaction resistance and promotes the failure of specimens under bidirectional shearing conditions. The microscopic analysis was performed to reveal the relationship between the fabric evolution and external loading, which can provide profound insights into the underlying mechanism of the cyclic behavior and liquefaction susceptibility of granular material when both the bidirectional shearing and initial static shear effects are considered.

Impact of Static Preshearing on Undrained Anisotropy and Shear Characteristics of Sand

Effects of Initial Static Shear on Cyclic Resistance and Pore Pressure Generation of Saturated Sand

Undrained Behavior of Sand under Cyclic Paths That Match Storm-Wave Loading Conditions

Discrete Element Modeling of Sand Behavior in a Biaxial Shear Test

Flow Deformation and Cyclic Resistance of Saturated Loose Sand Considering Initial Static Shear Effect

Failure Mechanisms of Sand under Asymmetrical Cyclic Loading Conditions: Experimental Observation and Constitutive Modelling

Energy-Based Approach to Quantify Cyclic Resistance and Pore Pressure Generation in Anisotropically Consolidated Sand

Discrete-Element Simulation of Dense Sand under Uni- and Bidirectional Cyclic Simple Shear Considering Initial Static Shear Effect

Previbration Signature on Dynamic Properties of Dry Sand

Undrained Anisotropy and Rotational Shear in Granular Soil

Undrained shear behavior of silty sand with a constant state parameter considering initial stress anisotropy effect

Liquefaction of Sand under Monotonic and Cyclic Shear Conditions: Impact of Drained Preloading History

Effect of Drained Static Shear on Cyclic Deformation Behavior of K-0-consolidated Sand

Permanent Deformation Characteristics of Saturated Sand under Cyclic Loading

Experimental Research On Behaviors Of Saturated Loose Sand Subjected To Oblique Ellipse Stress Path

Effect of principal stress direction on the instability of sand under the constant shear drained stress path

Experimental Study on Asymptotic Behaviour of Anisotropic Sand

Effect of Anisotropic Stress State on Elastic Shear Stiffness of Sand–Silt Mixture

Effect of Initial Consolidation Stress Path on Shear Behavior of Calcareous Sand

Experimental Investigation of Asymptotic State for Anisotropic Sand

Small-strain shear modulus of calcareous sand under anisotropic consolidation