Abstract:Huge and critical structures, such as fuel storage tanks and nuclear power plants, are often built on dense sandy grounds, which may cause excessive plastic deformations under multidirectional cyclic shearing conditions caused by earthquakes. The lack of investigation of sand behavior under multidirectional loading may lead to unsafe designs, and thus significantly increase the maintenance cost for infrastructures during their long operational time, which might be longer than 100 years. This study presents a numerical investigation on the liquefaction behavior of dense sand under bidirectional cyclic simple shear using the discrete element method. The bidirectional cyclic simple shear tests with varying stress trajectories on the deviatoric stress plane, including figure-8, circular, and straight lines, were conducted. Additionally, a series of unidirectional loading tests was conducted in the simulation scheme for comparison purposes. The effect of the initial static shear on the cyclic behavior and liquefaction resistance of granular materials was examined. Four loading categories, including full reversal, partial reversal, intermediate reversal, and no reversal, were implemented in the numerical simulations. Although the presence of the initial static shear may enhance the cyclic resistance of granular samples under unidirectional loading, it mitigates the liquefaction resistance and promotes the failure of specimens under bidirectional shearing conditions. The microscopic analysis was performed to reveal the relationship between the fabric evolution and external loading, which can provide profound insights into the underlying mechanism of the cyclic behavior and liquefaction susceptibility of granular material when both the bidirectional shearing and initial static shear effects are considered.

Static liquefaction of sands under multiaxial loading

Signature of Anisotropy in Liquefiable Sand under Undrained Shear

Failure Mechanisms of Sand under Asymmetrical Cyclic Loading Conditions: Experimental Observation and Constitutive Modelling

Discrete-Element Simulation of Dense Sand under Uni- and Bidirectional Cyclic Simple Shear Considering Initial Static Shear Effect

Undrained Behavior of Sand under Cyclic Paths That Match Storm-Wave Loading Conditions

Flow Deformation and Cyclic Resistance of Saturated Loose Sand Considering Initial Static Shear Effect

Effects of Initial Static Shear on Cyclic Resistance and Pore Pressure Generation of Saturated Sand

Impact of Static Preshearing on Undrained Anisotropy and Shear Characteristics of Sand

Energy-based Assessment of Cyclic Liquefaction Behavior of Clean and Silty Sand under Sustained Initial Stress Conditions

Cyclic Failure Characteristics of Silty Sands with the Presence of Initial Shear Stress

Liquefaction resistance of anisotropically consolidated sand under monotonic and cyclic undrained torsional shear

Liquefaction of Sand under Monotonic and Cyclic Shear Conditions: Impact of Drained Preloading History

Comparison of Cyclic Liquefaction Behavior of Clean and Silty Sands Considering Static Shear Effect

Effect of Drained Static Shear on Cyclic Deformation Behavior of K-0-consolidated Sand

Experimental studies on dynamic and static properties of sand during repeated liquefaction events

Static liquefaction behavior of saturated fiber-reinforced sand in undrained ring-shear tests

Cyclic Critical Stress States of Sand with Nonfrictional Effects

Drained Deformation Behavior of Anisotropic Sands during Cyclic Rotation of Principal Stress Axes

Numerical prediction of undrained cyclic triaxial experiments on saturated Kasai river sand using two constitutive models of liquefaction

Strain energy dissipation during liquefaction of fibre-reinforced sand under undrained cyclic triaxial loading

Transient Shear Strength of Saturated Sand under Cyclic Loading Considering Strain-Rate Effect