Abstract:Huge and critical structures, such as fuel storage tanks and nuclear power plants, are often built on dense sandy grounds, which may cause excessive plastic deformations under multidirectional cyclic shearing conditions caused by earthquakes. The lack of investigation of sand behavior under multidirectional loading may lead to unsafe designs, and thus significantly increase the maintenance cost for infrastructures during their long operational time, which might be longer than 100 years. This study presents a numerical investigation on the liquefaction behavior of dense sand under bidirectional cyclic simple shear using the discrete element method. The bidirectional cyclic simple shear tests with varying stress trajectories on the deviatoric stress plane, including figure-8, circular, and straight lines, were conducted. Additionally, a series of unidirectional loading tests was conducted in the simulation scheme for comparison purposes. The effect of the initial static shear on the cyclic behavior and liquefaction resistance of granular materials was examined. Four loading categories, including full reversal, partial reversal, intermediate reversal, and no reversal, were implemented in the numerical simulations. Although the presence of the initial static shear may enhance the cyclic resistance of granular samples under unidirectional loading, it mitigates the liquefaction resistance and promotes the failure of specimens under bidirectional shearing conditions. The microscopic analysis was performed to reveal the relationship between the fabric evolution and external loading, which can provide profound insights into the underlying mechanism of the cyclic behavior and liquefaction susceptibility of granular material when both the bidirectional shearing and initial static shear effects are considered.

Experimental studies on dynamic and static properties of sand during repeated liquefaction events

Energy-based Assessment of Cyclic Liquefaction Behavior of Clean and Silty Sand under Sustained Initial Stress Conditions

Discrete-Element Simulation of Dense Sand under Uni- and Bidirectional Cyclic Simple Shear Considering Initial Static Shear Effect

Failure Mechanisms of Sand under Asymmetrical Cyclic Loading Conditions: Experimental Observation and Constitutive Modelling

Characterizing the Liquefaction Potential and Pore Pressure Generation of Silty Sands Through the Energy-Based Approach in the Framework of Critical State Soil Mechanics

Effects of Initial Static Shear on Cyclic Resistance and Pore Pressure Generation of Saturated Sand

Undrained Behavior of Sand under Cyclic Paths That Match Storm-Wave Loading Conditions

Cyclic Failure Characteristics of Silty Sands with the Presence of Initial Shear Stress

Liquefaction of Sand under Monotonic and Cyclic Shear Conditions: Impact of Drained Preloading History

Comparison of Cyclic Liquefaction Behavior of Clean and Silty Sands Considering Static Shear Effect

A New Parameter to Evaluate Liquefaction Resistance of Saturated Sand under Complex Dynamic Stress Paths

Experimental Study on Strength and Deformation Characteristics of Saturated Sand after Liquefaction

Flow Liquefaction Potential of Loose Sand: Stress Path Envelope and Energy-Based Evaluation

Liquefaction resistance of anisotropically consolidated sand under monotonic and cyclic undrained torsional shear

Shear modulus reduction of saturated sand under large liquefaction-induced deformation in cyclic torsional shear tests

Numerical Modelling of Liquefaction in Loose Sand Deposits Subjected to Ocean Waves

Understanding fabric evolution and multiple liquefaction resistance of sands in the presence of initial static shear stress

DEM study of mechanism of large post-liquefaction deformation of saturated sand

Influence of Liquefaction History on Liquefaction Susceptibility

Experimental and numerical modeling on liquefaction resistance of geotextile reinforced sand

Dynamic Properties of Toyoura Sand in Reliquefaction Tests