Abstract:Huge and critical structures, such as fuel storage tanks and nuclear power plants, are often built on dense sandy grounds, which may cause excessive plastic deformations under multidirectional cyclic shearing conditions caused by earthquakes. The lack of investigation of sand behavior under multidirectional loading may lead to unsafe designs, and thus significantly increase the maintenance cost for infrastructures during their long operational time, which might be longer than 100 years. This study presents a numerical investigation on the liquefaction behavior of dense sand under bidirectional cyclic simple shear using the discrete element method. The bidirectional cyclic simple shear tests with varying stress trajectories on the deviatoric stress plane, including figure-8, circular, and straight lines, were conducted. Additionally, a series of unidirectional loading tests was conducted in the simulation scheme for comparison purposes. The effect of the initial static shear on the cyclic behavior and liquefaction resistance of granular materials was examined. Four loading categories, including full reversal, partial reversal, intermediate reversal, and no reversal, were implemented in the numerical simulations. Although the presence of the initial static shear may enhance the cyclic resistance of granular samples under unidirectional loading, it mitigates the liquefaction resistance and promotes the failure of specimens under bidirectional shearing conditions. The microscopic analysis was performed to reveal the relationship between the fabric evolution and external loading, which can provide profound insights into the underlying mechanism of the cyclic behavior and liquefaction susceptibility of granular material when both the bidirectional shearing and initial static shear effects are considered.

Cyclic and post-cyclic shear behavior of sand-geogrid interface under different shear rates

Cyclic and post-cyclic direct shear behaviors of geogrid-sand interface with different soil densities

Effect of particle gradation on static and dynamic direct shear properties of geogrid-sand interface

Experimental research on reinforcement-soil interface stiffness and damping ratio under cyclic shearing

Influence of soil particle size on monotonic and cyclic direct shear behaviors of geogrid-soil interface

Effects of Initial Static Shear on Cyclic Resistance and Pore Pressure Generation of Saturated Sand

Discrete-Element Simulation of Dense Sand under Uni- and Bidirectional Cyclic Simple Shear Considering Initial Static Shear Effect

Particle size effects on coarse soil-geogrid interface response in cyclic and post-cyclic direct shear tests

Effects of direct shear characteristics of sand-geogrid interface under different aperture ratios

Effect of aperture ratio on the cyclic shear behaviour of aggregate-geogrid interfaces

Effect of Particle-Size Gradation on Coarse Sand-Geotextile Interface Response in Cyclic and Postcyclic Direct Shear Test

Dynamic Shear Behavior of Interface for Clay Reinforced with Geogrid Encapsulated in Thin Layers of Sand

Analysis of cyclic shear characteristics of reinforced soil interfaces under cyclic loading and unloading

Cyclic behavior of interface shear between carbonate sand and steel

Coupling effects of particle shape and cyclic shear history on shear properties of coarse-grained soil–geogrid interface

Sand-Steel Interface Behaviour Under Large-Displacement And Cyclic Shear

Interface Shear Behavior of Geogrid-Reinforced Calcareous Sand Under Large-Scale Monotonic Direct Shear

Large-scale direct shear test investigation of the 3D behavior of a gravel-structure interfaces

Influence of shear paths on 3D cyclic behaviors of the gravel-structure interface

Effect of Particle Regularity on the Bidirectional Cyclic Shear Behavior of Geogrid–Granular Material Interface

Research on Shear Behavior of Sand–Structure Interface Based on Monotonic and Cyclic Tests