Abstract:We propose a hierarchical multiscale modeling approach to simulate the hydro-mechanical coupling behavior in saturated high-porosity sandstone, with a particular focus on the occurrence and transition of compaction bands. In this multiscale approach, we use the finite element method (FEM) to solve the global boundary value problem for a sandstone, and the discrete element method (DEM) to solve the local representative volume elements (RVEs) embedded at the Gauss integration points of the FE mesh to provide the effective material constitutive responses required for FEM. The global governing equations for a coupled hydro-mechanical problem are solved with the standard u–p formulation, where the total stress is decomposed into the pore pressure and the effective stress which is directly derivable from the DEM solution of the RVEs, according to the seminal Terzaghi's effective stress principle. By choosing proper RVEs to represent the typical microstructure of high-porosity sandstone, we perform both drained and undrained simulations on saturated sandstone specimens to examine localized compactive failures developed therein. We identify that both mean effective stress and porosity control critically the initiation and development of failure modes in sandstone. Under undrained shear, our simulations show that a sandstone specimen may first develop a compaction band followed by a gradual transition to a shear-enhanced compaction band and even shear band, with the build-up of excessive pore pressure and hence drop of mean effective stress. In the specimen, regions experiencing localized volumetric contraction show relatively higher pore pressure than other regions and act as the source of flux flow. The Darcy flux peaks during the formation of compaction band and decreases gradually in the following stages. To distinguish the different failure stages with distinct physical attributes, the ratio of deviatoric strain to volumetric strain is adopted as a useful indicator signifying the underlying microstructural mechanisms for different deformation bands. This study signifies the importance of considering pore pressure and mean effective stress in fluid-involved engineering operations, e.g. aquifer management, hydrocarbon extraction and CO2 geological sequestration.

Microanalysis of smooth Geomembrane–Sand interface using FDM–DEM coupling simulation

Discrete Element Modeling of Sand Behavior in a Biaxial Shear Test

Effect of Fines Loss on the Microstructure and Shear Behaviors of Gap-Graded Soils: A Multiscale Perspective

Multiscale Modeling and Analysis of Compaction Bands in High-Porosity Sandstones

Microscale geomembrane-granular material interactions

The Temperature-Dependent Monotonic Mechanical Characteristics of Marine Sand–Geomembrane Interfaces

Shear behaviors and peak friction angle predictions of three critical geomembrane–soil interfaces

Micromechanics-based multimechanism bounding surface model for sands

Microscale Study of Geomembrane-Geotextile Interactions

Shear strength of geomembrane–soil interface under unsaturated conditions

Strength Characteristics of a Smooth HDPE Geomembrane/Nonwoven Geotextile Interface Based on a Novel Ring Shear Apparatus

Integrated Digital Image Analyses for Understanding the Particle Shape Effects on Sand–Geomembrane Interface Shear

Influence of micro and macroroughness of geomembrane surfaces on soil-geomembrane and geotextile-geomembrane interface strength

Investigation of shear mechanical behaviors of geogrid-coral sand interfaces

Modelling unsaturated soil-structure interfacial behavior by using DEM

Dynamic Shear Behavior of Interface for Clay Reinforced with Geogrid Encapsulated in Thin Layers of Sand

Micromechanical Investigation of Suffusion and Its Consequence in Gap-Graded Granular Soil at the Opening of Underground Structures Using the Coupled CFD-DEM Method

Microscale analysis of geogrid–aggregate interface cyclic shear behavior using DEM

Effect of particle gradation on static and dynamic direct shear properties of geogrid-sand interface

Experiment study on shear strength of GM/GCL interface

Peak Friction Behavior of Smooth Geomembrane-Particle Interfaces