Abstract:A comprehensive CFD–DEM numerical model has been developed to simulate the biomass gasification process in a fluidized bed reactor. The methodology is based on an Eulerian–Lagrangian concept, which uses an Eulerian method for gas phase and a discrete element method (DEM) for particle phase. Each particle is individually tracked and associated with multiple physical (size, density, composition, and temperature) and thermo-chemical (reactive or inert) properties. Particle collisions, hydrodynamics of dense gas-particle flow in fluidized beds, turbulence, heat and mass transfer, radiation, particle shrinkage, pyrolysis, and homogeneous and heterogeneous chemical reactions are all considered during biomass gasification with steam. A sensitivity analysis is performed to test the integrated model׳s response to variations in three different operating parameters (reactor temperature, steam/biomass mass ratio, and biomass injection position). Simulation results are analyzed both qualitatively and quantitatively in terms of particle flow pattern, particle mixing and entrainment, bed pressure drop, product gas composition, and carbon conversion. Results show that higher temperatures are favorable for the products in endothermic reactions (e.g. H2 and CO). With the increase of steam/biomass mass ratio, H2 and CO2 concentrations increase while CO concentration decreases. The carbon conversion decreases as the height of injection point increases owing to both an increase of solid entrainment and a decrease of particle residence time and particle temperature. Meanwhile, the calculated results compare well with the experimental data available in the literature. This indicates that the proposed CFD–DEM model and simulations are successful and it can play an important role in the multi-scale modeling of biomass gasification or combustion in fluidized bed reactor.

CFD modeling of a fluidized bed with volatiles distributor for biomass chemical looping combustion

Prediction of Bubble Fluidisation During Chemical Looping Combustion Using CFD Simulation

Simulation of Biomass Pyrolysis in a Rotary Drum by Coupling CFD-DEM with a One-Dimensional Thermally Thick Model

Fluidized Bed Drying and Devolatilization of Lignite Washery Tailing Particles: Experiments and Modeling

CFD Modelling of the Co-Gasification of Biomass and Coal Particles in Fluidised Beds

Multi-Scale Simulation of Biomass Gasification in Fluidized Beds

Numerical simulation of a chemical looping combustion of biomass: Hydrodynamic investigation

CFD simulation of a fluidized bed reactor for biomass chemical looping gasification with continuous feedstock

Modeling of the axial distributions of volatile species in a circulating fluidized bed boiler

CFD–DEM simulation of biomass gasification with steam in a fluidized bed reactor

CFD-DEM simulation of chemical looping hydrogen generation in a moving bed reactor

CFD-DEM Investigation of the Fluidization of Binary Mixtures Containing Rod-Like Particles and Spherical Particles in a Fluidized Bed

CFD investigation of the complex multiphase flow of biomass gasification in industrial-scale dual fluidized bed reactor

Effects of operating conditions and reactor structure on biomass entrained-flow gasification

Numerical simulation of gasification characteristics in a circulating fluidized bed biomass gasifiers

Three-dimensional simulation of biomass gasification in a full-loop pilot-scale dual fluidized bed with complex geometric structure

Multi-scale Simulation of Chemical Looping Combustion in Dual Circulating Fluidized Bed

Modelling of multiphase reactive flows in a full-loop coal-direct chemical looping combustor

Three-dimensional full-loop simulation of biomass gasification in dual fluidized bed

CFD modeling of biomass combustion and gasification in fluidized bed reactors using a distribution kernel method

CFD simulation study of a biomass pellet-fuelled boiler