Abstract:A comprehensive 1-dimensional/1.5-dimensional hybrid mathematical model is developed for predicting NOx emission of a circulating fluidized bed (CFB) combustor under broader operating parameters. In this model, the local gas-solid fluidization state and gas/heat transfer conditions in different regions of a CFB combustor are specifically considered. Some two- or three-dimensional problems, such as bubble breakage over dense bed surface, secondary air injection, core-annular flow structure, and particle clusters in freeboard, are also taken into account in 1-D/1.5-D modeling. The detailed chemical kinetic mechanism is creatively used to describe the homogeneous reaction system towards CFB combustion simulation. In addition to operating parameters and fuelspecific inputs, no other model parameters can be trimmed from case to case. This integral CFB model is validated against the field test data obtained from three commercial CFB boilers with different capacities, some of which are first disclosed. Favorable comparisons are obtained between the predicted and measured results, involving particle size distributions, temperature and pressure profiles, and NOx/SO2 emissions. The final NO emission, as well as gas profiles, are somewhat different among the cases, which may be attributed to the discrepancy in boiler structure, fuel properties, and operating conditions. Further sensitivity analysis indicates that the proportion of volatile-N in total fuel-N, char combustion reactivity, and char-NO reactivity significantly impact the NOx emission for CFB combustion. Meanwhile, the gas-solid fluidization state also plays an essential role in the NOx emission and the in-furnace combustion efficiency, such as the gas flow distribution between phases, bubble size, secondary air penetration depth, etc. However, the NOx emission seems insensitive to the particle external gas mass transfer coefficients.

Modeling of the axial distributions of volatile species in a circulating fluidized bed boiler

Modeling and Experimental Investigation on the Fuel Particle Heat-Up and Devolatilization Behavior in a Fluidized Bed

Modeling Study on Non‐Uniform Lateral Distribution in Large‐Scale Circulating Fluidized Bed Boilers

A STATISTICAL MODEL FOR VOLATILE MATTER LIBERATION OF HIGH VOLATILE FUELS IN CIRCULATING FLUIDIZED BED COMBUSTOR

12th International Conference on Fluidized Bed Technology MODELING STUDY ON NON-UNIFORM DISTRIBUTION IN THE LATERAL DIRECTION IN LARGE SCALE CFB BOILERS

Combustion Modeling Of Cfb Boiler Furnace Based On An Euler-Euler Approach

Prediction and Minimization of NOx Emission in a Circulating Fluidized Bed Combustor: A Comprehensive Mathematical Model for CFB Combustion

Modeling of NO and N2O formation and decomposition in circulating fluidized bed boiler

Modeling of a 300 MW Circulating Fluidized Bed Boiler

Dynamic Modeling and Simulation of CFB Boiler

CFD modeling of a fluidized bed with volatiles distributor for biomass chemical looping combustion

Particle Population Balance Model for a Circulating Fluidized Bed Boiler

CFD Modelling of the Co-Gasification of Biomass and Coal Particles in Fluidised Beds

Dynamic Model Establishment and Analysis on Gas-solid Flow in CFB Whole Loop

A mathematical model for a circulating fluidized bed (CFB) boiler

Model of coal slime combustion behavior in CFB boiler

1D modeling on the material balance in CFB boiler

Hydrodynamic Model with Binary Particle Diameters to Predict Axial Voidage Profile in a CFB Combustor

Simulation of Heat and Mass Transfer in a Moving Bed Part-fluidized Boiler

A Comprehensive CFD Combustion Model for Supercritical CFB Boilers

Modelling and Simulation of the 50 MWe CFBC Boiler