Abstract:A comprehensive CFD–DEM numerical model has been developed to simulate the biomass gasification process in a fluidized bed reactor. The methodology is based on an Eulerian–Lagrangian concept, which uses an Eulerian method for gas phase and a discrete element method (DEM) for particle phase. Each particle is individually tracked and associated with multiple physical (size, density, composition, and temperature) and thermo-chemical (reactive or inert) properties. Particle collisions, hydrodynamics of dense gas-particle flow in fluidized beds, turbulence, heat and mass transfer, radiation, particle shrinkage, pyrolysis, and homogeneous and heterogeneous chemical reactions are all considered during biomass gasification with steam. A sensitivity analysis is performed to test the integrated model׳s response to variations in three different operating parameters (reactor temperature, steam/biomass mass ratio, and biomass injection position). Simulation results are analyzed both qualitatively and quantitatively in terms of particle flow pattern, particle mixing and entrainment, bed pressure drop, product gas composition, and carbon conversion. Results show that higher temperatures are favorable for the products in endothermic reactions (e.g. H2 and CO). With the increase of steam/biomass mass ratio, H2 and CO2 concentrations increase while CO concentration decreases. The carbon conversion decreases as the height of injection point increases owing to both an increase of solid entrainment and a decrease of particle residence time and particle temperature. Meanwhile, the calculated results compare well with the experimental data available in the literature. This indicates that the proposed CFD–DEM model and simulations are successful and it can play an important role in the multi-scale modeling of biomass gasification or combustion in fluidized bed reactor.

CFD simulation of a fluidized bed reactor for biomass chemical looping gasification with continuous feedstock

Numerical simulation of a chemical looping combustion of biomass: Hydrodynamic investigation

Multi-Scale Simulation of Biomass Gasification in Fluidized Beds

CFD-DEM simulation of chemical looping hydrogen generation in a moving bed reactor

CFD Modelling of the Co-Gasification of Biomass and Coal Particles in Fluidised Beds

Effects of operating conditions and reactor structure on biomass entrained-flow gasification

Chemical looping pyrolysis-gasification of biomass for high H2/CO syngas production

Coal-fueled chemical looping gasification: A CFD-DEM study

Three-dimensional Simulation of a Gas-Fueled Chemical Looping Combustion System with Dual Circulating Fluidized Bed Reactors

CFD simulation of air-blown coal gasification in a fluidized bed reactor with continuous feedstock

Chemical Looping Gasification of Lignocellulosic Biomass with Iron-Based Oxygen Carrier: Products Distribution and Kinetic Analysis on Gaseous Products from Cellulose

Numerical Analysis of Biomass Gasification in a Fluidized Bed Reactor Using a Computational Fluid Dynamics Model Integrated with Reduced-Order Reaction Kinetics

Configuration Optimization of a Biomass Chemical Looping Gasification (CLG) System Combined with CO2 Absorption

Three-dimensional transient CFD simulation of lignite chemical looping gasification in a circulating fluidized bed

Thermodynamic and kinetic analysis on the biomass syngas fueled chemical looping hydrogen generation process in fixed bed reactor

Syngas, tar and char behavior in chemical looping gasification of sawdust pellet in fluidized bed

CFD investigation of the complex multiphase flow of biomass gasification in industrial-scale dual fluidized bed reactor

Multi-scale Simulation of Chemical Looping Combustion in Dual Circulating Fluidized Bed

CFD–DEM simulation of biomass gasification with steam in a fluidized bed reactor

Liquid Chemical Looping Gasification of Biomass: Thermodynamic Analysis on Cellulose

Numerical simulation of gasification characteristics in a circulating fluidized bed biomass gasifiers