Abstract:TiC ceramics have become one of the most potential ultra-high temperature structural materials, because of its high melting point, low density, and low price. However, the poor mechanical properties seriously limit its development and application. In this work, this review follows PRISMA standards, the mechanism of the second phase (particles, whiskers, and carbon nanotubes) reinforced TiC ceramics was reviewed. In addition, the effects of the second phase on the microstructure, phase composition and mechanical properties of TiC ceramics were systematically studied. The addition of carbon black effectively eliminates the residual TiO2 in the matrix, and the bending strength of the matrix is effectively improved by the strengthening bond formed between TiC; SiC particles effectively inhibit the grain growth through pinning, the obvious crack deflection phenomenon is found in the micrograph; The smaller grain size of WC plays a dispersion strengthening role in the matrix and makes the matrix uniformly refined, and the addition of WC forms (Ti, W) C solid solution, WC has a solid solution strengthening effect on the matrix; SiC whiskers effectively improve the fracture toughness of the matrix through bridging and pulling out, the microscopic diagram and mechanism diagram of SiC whisker action process are shown in this paper. The effect of new material carbon nanotubes on the matrix is also discussed; the bridging effect of CNTs can effectively improve the strength of the matrix, during sintering, some CNTs were partially expanded into GNR, in the process of crack bridging and propagation, more fracture energy is consumed by flake GNR. Finally, the existing problems of TiC-based composites are pointed out, and the future development direction is prospected.

Novel strong and tough Ta/TaHfC 2 composites with multi‐scale laminated structure

Improved toughness of HfC with tantalum fibre net and tantalum foil

Efficient multiscale strategy for toughening HfB 2 ceramics: A heterogeneous ceramic–metal layered architecture

Microstructures and mechanical properties of high-entropy (Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C ceramics with the addition of SiC secondary phase

Low temperature densification mechanism and properties of Ta1-Hf C solid solutions with decarbonization and phase transition of Cr3C2

A strong, machinable, and multifunctional Ti3SiC2-(Ti3SiC2-Cf) composite: Gradient architecture and mechanical properties

A strong, ductility maintained, and high-temperature resistant Ti-based composite with TiC@(TiCr 2 +α-Ti) reinforced particles

Microstructure and mechanical behavior of TaxHf1−xC–SiC fabricated by reactive hot‐pressing: Effect of Ta:Hf ratio

Ultra-toughened Al2O3–TiC–Co ceramic

Improving fracture toughness and densification behavior of single‐phase TaC–HfC ceramic with carbon additives

Microstructural evolution and mechanical properties of in situ nano Ta4HfC5 reinforced SiBCN composite ceramics

Microstructures and mechanical properties of (Nb0.25Mo0.25Ta0.25W0.25)C and (Nb0.2Mo0.2Ta0.2W0.2Hf0.2)C high-entropy carbide ceramics produced by arc melting

Microstructure and Mechanical Properties of Carbide Reinforced TiC-Based Ultra-High Temperature Ceramics: A Review

Hierarchically heterogeneous strategy for Ti 2 AlC/TiAl composite with superior mechanical properties

Ablation-resistant Ta0.78Hf0.22C solid solution ceramic modified C/C composites for oxidizing environments over 2200 °C

Elasticity, mechanical and thermal properties of polycrystalline hafnium carbide and tantalum carbide at high pressure

Strengthening and toughening of laminated TiAl composite sheets by titanium alloy layers and carbide particles

Eutectic-like composite of MoNbWTaC with outstanding strength and plasticity at elevated temperature

Novel refractory high-entropy metal-ceramic composites with superior mechanical properties

Ultra-high temperature ablation behavior of CVD-Hf 5 TaC 6 solid solution ceramic coating for C/C composites: Experiment and first-principle calculation

Lattice stability, mechanical and thermal properties of a new class of multicomponent (Fe, Mo, W)6C η carbides with different atomic site configurations