Abstract:Previously we have found that (NbTaZrW)C exhibits a good combination of nanohardness and toughness. In this report, we explore the possibility to further increase the overall properties of this high entropy carbide ceramic (HECC) through introducing SiC particle (SiCP). To this end, a series of (NbTaZrW)C‐xSiC ceramic composites (x = 0/5/15/30/50 vol.%) were fabricated using spark plasma sintering (SPS), their microstructure and mechanical properties were characterized. Our results reveal a grain refinement effects of SiCP, an agglomeration of SiCP with (100) plane preferentially perpendicular to the SPS‐pressing direction and the formation of a transition region with various stoichiometric ratio of (NbTaZrW)xC1‐x in the (NbTaZrW)C‐SiCP vicinity. The elastic modulus, microhardness and flexural strength of the HECCs show tight positive relations with the SiCP content and the beneficial effect of SiCP to the fracture toughness of (NbTaZrW)C becomes evident once the content of SiCP reaches 30 vol.%. Altogether, (NbTaZrW)C‐50%SiC, which has a microhardness of 22 GPa, a flexural strength of 455 MPa and an indentation fracture toughness of 6.54 MPa·m1/2, presents the optimal combination of mechanical properties among the investigated composites. Mechanistically, the strengthening effect of SiCP introduction arises from the intrinsic high hardness of SiCP and the SiCP‐induced grain refinement and the toughening effect is mainly associated with crack bridging mechanism. This article is protected by copyright. All rights reserved

Microstructure and mechanical behavior of TaxHf1−xC–SiC fabricated by reactive hot‐pressing: Effect of Ta:Hf ratio

Low‐temperature reactive hot‐pressing of Ta0.2Hf0.8C‐SiC ceramics at 1700°C

Experimental and theoretical study on electronic structure and mechanical property of TaxHf1−xC

Low temperature densification mechanism and properties of Ta1-Hf C solid solutions with decarbonization and phase transition of Cr3C2

Microstructures and mechanical properties of high-entropy (Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C ceramics with the addition of SiC secondary phase

Microstructure and mechanical properties of TaC ceramics with 1–7.5 mol% Si as sintering aid

Microstructure and Mechanical Properties of HfC-SiC Ceramics Influenced by WC Addition

Elasticity, mechanical and thermal properties of polycrystalline hafnium carbide and tantalum carbide at high pressure

Influence of TiC content on microstructure and mechanical properties of (Ta, Ti)C ceramics

Interface Structure and Grain Growth Behavior of Ta 4 HfC 5 -Si 2 BC 3 N Complex Ceramic

Effect of SiC on the anti-ablation resistance and flexural strength of (Hf-Ta-Zr)C-C/C composites

Temperature-dependent mechanical properties of TaC and HfC

Improving fracture toughness and densification behavior of single‐phase TaC–HfC ceramic with carbon additives

Sintering behavior and mechanical properties of Ta<sub>4</sub>HfC<sub>5</sub>-based composites with ZrB<sub>2</sub> additive

Strengthening Hf0.95Ta0.05B2 Ceramic With Ultrafine Grains and High-density Dislocations

Densification, Microstructure and Mechanical Properties of Ta4HfC5-based Ceramics Obtained from Synthesized Nanoscale Powder

Microstructural evolution and mechanical properties of in situ nano Ta4HfC5 reinforced SiBCN composite ceramics

Pressureless sintering and properties of (Hf0.2Zr0.2Ta0.2Nb0.2Ti0.2)C high-entropy ceramics: The effect of pyrolytic carbon

Phase Formation, Microstructure and Mechanical Properties of TaB2-SiC Composites Synthesized by Reaction Hot Pressing: Effects of SiC Contents and Oxygen Impurity

Simultaneous hardening and toughening of a high entropy (NbTaZrW)C ceramic carbide using SiC particle

Novel strong and tough Ta/TaHfC 2 composites with multi‐scale laminated structure