Abstract:Solar air heater (SAH) is used to convert readily available solar energy into useful thermal energy. Several studies have been conducted with different roughness elements on the absorber plate. However, study with ribs which are placed slightly above the heated plate, termed as offset transverse ribs, are still scant in the literature. Such study would explain the effect of flow between the ribs and the absorber plate on heat transfer augmentation in a SAH. With this objective a 2-D numerical study is performed here by solving steady RANS equations with RNG k−ɛ turbulence model. The effect of offset transverse ribs on heat transfer, pressure drop and thermal enhancement factor ( TEF ) is investigated. The geometrical parameters, such as, relative gap ( α ), relative height ( β ) and relative pitch ( λ ) are varied in the range of 0.0–0.045, 0.015 to 0.09, and 0.0333 to 0.1, respectively. The performance of SAH is evaluated on the basis of highest enhancement in relative Nusselt number ( NuR/Nu ) and thermal enhancement factor ( TEF ). A slight gap between the ribs and the absorber plate ( α = 0.0075) is observed to yield better thermal performance than that for the attached ribs ( α = 0). The maximum enhancement in NuR/Nu is found to be 1.52 for α = 0.0075. However, increasing the gap (i.e., α ) prevents the flow reattachment with the absorber plate. Increase in rib height, on the other hand, is found to be more effective in heat transfer enhancement, but with a price of a significant enhancement in pressure drop. This leads to a reduction in the overall performance of SAH. Increment in pitch distance, however, reduces the enhancement in both Nusselt number and friction factor. By considering these three parameters, the highest TEF is found to be 1.042 for α=0.0075 , β=0.030 , and λ=0.0333 at Re equal to 13000. Finally, correlations for NuR and fR are derived as a function of the parameters investigated for helping the design of SAHs.

Experimental Study of Reverse Flow Solar Air Heater Having Perforation and Delta Wing on Absorber Plate

Experimental study on the thermal performance of a solar air heater integrated with multi-geometry arrangements over the absorber plate

Numerical analysis of a solar air heater with offset transverse ribs placed near the absorber plate

Environmental, economic, and performance assessment of solar air heater with inclined and winglet baffle

Investigation on energy, economic, and environmental aspects of double-pass solar air heater

Prediction of behavior of triangular solar air heater duct using V-down rib with multiple gaps and turbulence promoters as artificial roughness: A CFD analysis

Experimental and numerical thermal performance in solar receiver heat exchanger with trapezoidal louvered winglet and wavy groove

Thermohydraulic performance parameter based experimental investigation of frustum shaped roughened solar air heater

Enhancing heat transfer in rectangular solar air heater channels: a numerical exploration of multiple Boomerang-shaped roughness elements with variable gaps

Application of artificial intelligence to investigate the performance and flow pattern near staggered piece in V-ribs with aligned gaps roughness in solar air heater using relevant input parameters

Assessing the effects of different finned absorbers with swirl flow on the performance of solar air heater

Investigation of the effect of dimensional and non-dimensional parameters on the performance of pitch-varied staggered arranged dimple solar air heaters

Heat transfer and fluid flow analysis of a solar air heater using conical jet impingement with sine-wave corrugation on absorber plate

Thermodynamic performance evaluation of an indoor designed solar air heater duct equipped with V-down baffle blocks having racetrack-shaped staggered openings of varying aspect ratio – an experimental study

Exploring nusselt number and friction factor correlations for sphere-shaped roughness elements on the absorber to enhance solar air heater efficiency

Experimental study on thermal performance of reverse flow solar collector for dual heating applications

Turbulent flow-thermal-thermodynamic characteristics of a solar air heater with spiral fins

Optimizing of a metal foam-assisted solar air heater performance: a thermo-hydraulic analysis of porous insert placement

Heat transfer Enhancement of Impinging Jet-Corrugated Solar Air Heaters

Numerical Investigation on the Performance of a Solar Air Heater Using Inclined Impinging Jets on Absorber Plate with Parallel and Crossing Orientation of Nozzles

Thermal Performance Factor of Impinging Jet‐Angled Corrugated Solar Air Heaters