Abstract:Solar air heaters are emerging as a promising solution for sustainable heating, as they harness abundant solar energy to provide heat for a variety of applications. However, their optimum efficiency remains a major challenge. Deflectors have significant potential to improve the performance of solar air heaters by redirecting airflow and optimizing heat transfer, making them more efficient and more suitable for large-scale adoption. This article examines the performance of a new baffle design aimed at improving heat transfer in the channel by increasing the exchange surface between fluid and solid surface. It consists of a " ≠ " -shaped baffle mounted on the top and bottom walls of the channel. An in-depth analysis of the spacing between these baffles was carried out to assess their impact on the thermal and aerodynamic properties of the solar air channel. Computational Fluid Dynamics (CFD) was used to perform the calculations, using the Finite Volume Method (FVM) in conjunction with the SIMPLE algorithm. All studies are carried out using the CFD code Fluent. Crucial steps in this research include studying the influence of these new baffles at different Reynolds numbers, ranging from 15000 to 35000, as well as varying the separation distance between the two baffles, chosen periodically ( DBaffle/2 , 3DBaffle/4 , DBaffle , 5DBaffle/4 and 3DBaffle/2 ). Some of the numerical results were validated with the available experimental data and showed satisfactory agreement. The study identified an optimal case for the new baffles, by reducing the distance between the baffles, an improvement in system performance was observed, by increasing the flow strength and widening the recycling cells, which has an impact on dynamic behavior and heat transfer. The presence of this new baffle design, with minimal separation distance between them, demonstrated a significant thermal improvement, with a thermal improvement factor increasing by 44% compared to the simple channel without baffles, thus highlighting the effectiveness of the new solar air channel with " ≠ " -shaped baffles.

Thermodynamic performance evaluation of an indoor designed solar air heater duct equipped with V-down baffle blocks having racetrack-shaped staggered openings of varying aspect ratio – an experimental study

Experimental study on the thermal performance of a solar air heater integrated with multi-geometry arrangements over the absorber plate

Prediction of behavior of triangular solar air heater duct using V-down rib with multiple gaps and turbulence promoters as artificial roughness: A CFD analysis

Influence of solar insolation on energy and exergy efficiency of a rectangular duct solar air heater with various types of V rib roughness: An analytical approach

Thermal performance evaluation of a solar air heater integrated with helical tubes carrying phase change material

Environmental, economic, and performance assessment of solar air heater with inclined and winglet baffle

Application of artificial intelligence to investigate the performance and flow pattern near staggered piece in V-ribs with aligned gaps roughness in solar air heater using relevant input parameters

Understanding thermo-fluidic characteristics of a triangular solar air heater having W-shaped rib-turbulators: A 3D CFD study

Effect of the baffle's type on thermal performance of solar air heaters

Effective thermal performance assessment for prismatic triangular solar air heater integrated with fins and turbulators

CFD Analysis and Taguchi-Based Optimization of the Thermohydraulic Performance of a Solar Air Heater Duct Baffled on a Back Plate

Experimental Study of Reverse Flow Solar Air Heater Having Perforation and Delta Wing on Absorber Plate

Effect of channel depth ratio and absorber plate configuration on performance of a solar air heater

Enhancing performance in solar air channels: A numerical analysis of turbulent flow and heat transfer with novel shaped baffles

Investigation on energy, economic, and environmental aspects of double-pass solar air heater

Applications of extended surfaces for improvement in the performance of solar air heaters-a detailed systematic review

Impact of corrugated duct and heat storage element on the performance of a low-cost solar air heater under forced air circulation: an experimental study

Heat transfer and thermal–hydraulic evaluations of cross-circular grooved rectangular flow ducts depending on rectangular baffle design parameters

Nusselt number and friction characteristics of solar air heater roughened with novel twisted V-shaped staggered ribs using liquid crystal thermography

Effect of the partial blockage in the exit of the mixing channel on thermo - Hydraulic performance of the multi – Pass jet plate solar air heater

Thermal Evaluation of a Double-Pass Unglazed Solar Air Heater with Perforated Plate and Wire Mesh Layers