Abstract:Solar air heaters are emerging as a promising solution for sustainable heating, as they harness abundant solar energy to provide heat for a variety of applications. However, their optimum efficiency remains a major challenge. Deflectors have significant potential to improve the performance of solar air heaters by redirecting airflow and optimizing heat transfer, making them more efficient and more suitable for large-scale adoption. This article examines the performance of a new baffle design aimed at improving heat transfer in the channel by increasing the exchange surface between fluid and solid surface. It consists of a " ≠ " -shaped baffle mounted on the top and bottom walls of the channel. An in-depth analysis of the spacing between these baffles was carried out to assess their impact on the thermal and aerodynamic properties of the solar air channel. Computational Fluid Dynamics (CFD) was used to perform the calculations, using the Finite Volume Method (FVM) in conjunction with the SIMPLE algorithm. All studies are carried out using the CFD code Fluent. Crucial steps in this research include studying the influence of these new baffles at different Reynolds numbers, ranging from 15000 to 35000, as well as varying the separation distance between the two baffles, chosen periodically ( DBaffle/2 , 3DBaffle/4 , DBaffle , 5DBaffle/4 and 3DBaffle/2 ). Some of the numerical results were validated with the available experimental data and showed satisfactory agreement. The study identified an optimal case for the new baffles, by reducing the distance between the baffles, an improvement in system performance was observed, by increasing the flow strength and widening the recycling cells, which has an impact on dynamic behavior and heat transfer. The presence of this new baffle design, with minimal separation distance between them, demonstrated a significant thermal improvement, with a thermal improvement factor increasing by 44% compared to the simple channel without baffles, thus highlighting the effectiveness of the new solar air channel with " ≠ " -shaped baffles.

CFD Analysis and Taguchi-Based Optimization of the Thermohydraulic Performance of a Solar Air Heater Duct Baffled on a Back Plate

Parameters optimization of a parallel-flow heat exchanger with a new type of anti-vibration baffle and coiled wire using Taguchi method

Effect of the baffle's type on thermal performance of solar air heaters

Prediction of behavior of triangular solar air heater duct using V-down rib with multiple gaps and turbulence promoters as artificial roughness: A CFD analysis

Understanding thermo-fluidic characteristics of a triangular solar air heater having W-shaped rib-turbulators: A 3D CFD study

Experimental and numerical investigations of shell-side thermo-hydraulic performances for shell-and-tube heat exchanger with trefoil-hole baffles

Thermo-hydraulic performance of solar air heater with built-in one-eighth sphere vortex generators

Enhancing performance in solar air channels: A numerical analysis of turbulent flow and heat transfer with novel shaped baffles

Heat transfer and thermal–hydraulic evaluations of cross-circular grooved rectangular flow ducts depending on rectangular baffle design parameters

Thermohydraulic performance parameter based experimental investigation of frustum shaped roughened solar air heater

Numerical simulation and performance improvement for a small size shell-and-tube heat exchanger with trefoil-hole baffles

Effective thermal performance assessment for prismatic triangular solar air heater integrated with fins and turbulators

Numerical study of shellside performance of heat transfer and flow resistance for heat exchanger with trefoil-hole baffles

Fully-Developed Convective Heat Transfer and Pressure Drop in a Square Duct With Baffle Inserts Using CFD Analysis

Nusselt number and friction characteristics of solar air heater roughened with novel twisted V-shaped staggered ribs using liquid crystal thermography

Thermodynamic performance evaluation of an indoor designed solar air heater duct equipped with V-down baffle blocks having racetrack-shaped staggered openings of varying aspect ratio – an experimental study

Enhancing heat transfer in rectangular solar air heater channels: a numerical exploration of multiple Boomerang-shaped roughness elements with variable gaps

Numerical investigation and experimental validation of thermo-hydraulic and thermodynamic performances of helical baffle heat exchangers with different baffle configurations

Optimization of thermosolutal convection in vertical porous annulus with a circular baffle

Numerical Investigation on the Performance of a Solar Air Heater Using Inclined Impinging Jets on Absorber Plate with Parallel and Crossing Orientation of Nozzles

Application of Response Surface Methodology for Analysing and Optimizing the Finned Solar Air Heater