Abstract:Solar air heater (SAH) is used to convert readily available solar energy into useful thermal energy. Several studies have been conducted with different roughness elements on the absorber plate. However, study with ribs which are placed slightly above the heated plate, termed as offset transverse ribs, are still scant in the literature. Such study would explain the effect of flow between the ribs and the absorber plate on heat transfer augmentation in a SAH. With this objective a 2-D numerical study is performed here by solving steady RANS equations with RNG k−ɛ turbulence model. The effect of offset transverse ribs on heat transfer, pressure drop and thermal enhancement factor ( TEF ) is investigated. The geometrical parameters, such as, relative gap ( α ), relative height ( β ) and relative pitch ( λ ) are varied in the range of 0.0–0.045, 0.015 to 0.09, and 0.0333 to 0.1, respectively. The performance of SAH is evaluated on the basis of highest enhancement in relative Nusselt number ( NuR/Nu ) and thermal enhancement factor ( TEF ). A slight gap between the ribs and the absorber plate ( α = 0.0075) is observed to yield better thermal performance than that for the attached ribs ( α = 0). The maximum enhancement in NuR/Nu is found to be 1.52 for α = 0.0075. However, increasing the gap (i.e., α ) prevents the flow reattachment with the absorber plate. Increase in rib height, on the other hand, is found to be more effective in heat transfer enhancement, but with a price of a significant enhancement in pressure drop. This leads to a reduction in the overall performance of SAH. Increment in pitch distance, however, reduces the enhancement in both Nusselt number and friction factor. By considering these three parameters, the highest TEF is found to be 1.042 for α=0.0075 , β=0.030 , and λ=0.0333 at Re equal to 13000. Finally, correlations for NuR and fR are derived as a function of the parameters investigated for helping the design of SAHs.

Application of response surface methodology and computational fluid dynamics for analyzing and optimizing the performance of finned solar air heater

Application of Response Surface Methodology for Analysing and Optimizing the Finned Solar Air Heater

Effective thermal performance assessment for prismatic triangular solar air heater integrated with fins and turbulators

Numerical and experimental investigation of heat transfer of longitudinal fin with varying pitch length in flat plate solar air heater

Experimental study of heat transfer characteristics of an impinging jet solar air heater with fins

Turbulent flow-thermal-thermodynamic characteristics of a solar air heater with spiral fins

Analysis of solar air heaters based on computational fluid dynamics

Hydraulic and Thermal Performances of A Novel Configuration of High Temperature Ceramic Plate-Fin Heat Exchanger

Applications of extended surfaces for improvement in the performance of solar air heaters-a detailed systematic review

Multi-objective optimization of a laterally perforated-finned heat sink with computational fluid dynamics method and statistical modeling using response surface methodology

Heat transfer and fluid flow analysis of a solar air heater using conical jet impingement with sine-wave corrugation on absorber plate

Numerical simulation of an innovative design of solar air heater using spiral duct inserts for enhancing thermal efficiency

Parametric optimization of hybrid artificial roughness used in solar air heaters using multiple criteria decision making techniques

Application of Field Synergy Principle for Fin Reshaping of a Natural Convection Radiator

Ansys Mechanical Automation using Python for the Steady State Thermal Analysis of Fins

Assessing the effects of different finned absorbers with swirl flow on the performance of solar air heater

Numerical analysis of a solar air heater with offset transverse ribs placed near the absorber plate

Pressure drop and friction factor study for an airfoil-fin printed circuit heat exchanger using experimental and numerical techniques

Modeling of Thermal-hydraulic Characteristics of H-type Finned Tube Using Response Surface Methodology

Prediction of behavior of triangular solar air heater duct using V-down rib with multiple gaps and turbulence promoters as artificial roughness: A CFD analysis

Exploring nusselt number and friction factor correlations for sphere-shaped roughness elements on the absorber to enhance solar air heater efficiency