Abstract:Purpose The performance of solid fins inside a differentially heated cubical cavity is numerically studied in this paper. The main purpose of the study is to make an optimization to reach the maximum heat transfer in the enclosure having the solid fins with studied parameters. Design/methodology/approach The considered domain of interest is a differentially heated cube having heat-conducting solid fins placed on the heated wall while an opposite wall is a cooled one. Other walls are adiabatic. Governing equations describing natural convection in the fluid filled cube and heat conduction in solid fins have been written using non-dimensional variables such velocity and vorticity taking into account the Boussinesq approximation for the buoyancy force and ideal solid/fluid interfaces between solid fins and fluid. The formulated equations with appropriate initial and boundary conditions have been solved by the finite difference method of the second of accuracy. The developed in-house computational code has been validated using the mesh sensitivity analysis and numerical data of other authors. Analysis has been performed in a wide range of key parameters such as Rayleigh number (Ra = 10 4 –10 6 ), non-dimensional fins length (l = 0.2–0.8), non-dimensional location of fins (d = 0.2–0.6) and number of fins (n = 1–3). Findings From numerical methods point of view the used non-primitive variables allows to perform numerical simulation of convective heat transfer in three-dimensional (3D) regions with two advantages, namely, excluding difficulties that can be found using vector potential functions and reducing the computational time compared to primitive variables and SIMPLE-like algorithms. From a physical point of view, it has been shown that using solid fins can intensify the heat transfer performance compared to cavities without any fins. Fins located close to the bottom wall of the cavity have a better heat transfer rate than those placed close to the upper cavity surface. At high Rayleigh numbers, increasing the fins length beyond 0.6 leads to a reduction of the average Nusselt number, and one solid fin can be used to intensify the heat transfer. Originality/value The present numerical study is based on hybrid approach for numerical analysis of convective heat transfer using velocity and vorticity that has some mentioned advantages. Obtained results allow intensifying the heat transfer using solid fins in 3D chambers with appropriate location and length.

Ansys Mechanical Automation using Python for the Steady State Thermal Analysis of Fins

Study of Heat Conduction Transfer Functions of Fins

Numerical auxiliary study of charge-air cooler design

Numerical investigations of fluid flow and heat transfer in double forward facing step in the presence of a fin

Application of response surface methodology and computational fluid dynamics for analyzing and optimizing the performance of finned solar air heater

Exact theoretical solution and numerical study of thermal analysis of a type of nonlinear temperature-dependent material fin

Numerical study of Heat Transfer Enhancement by Deformable Twin Plates in Laminar Heated Channel flow

Differential transformation method to determine heat transfer in annular fins

Heat transfer enhancement of a cylinder by flexible fins in turbulent flow

Numerical simulation of natural convection in a differentially heated cubical cavity with solid fins

Analysis of the convective heat transfer through straight fin by using the Riemann-Liouville type fractional derivative: Probed by machine learning

Numerical Simulation and Experimental Verification on Thermal Performance of A Novel Fin-Plate Thermosyphon

Experimental and numerical investigation of thermal-hydraulic performance of bi-metallic (Al-Cu) plate fin heat sink

On the Computational Study of a Fully Wetted Longitudinal Porous Heat Exchanger Using a Machine Learning Approach

Investigation of Heat Transfer from Convective and Radiative Stretching/Shrinking Rectangular Fins

A novel computing method for the fractal paradigm of straight fin energy problem arising in the heat transfer

Unsteady state heat transfer analysis of a convective-radiative rectangular fin using Laplace Transform-Galerkin weighted residual method

Analysis of temperature-dependent thermal conductivity and fin efficiency: Direct Akbari-Ganji method

Numerical investigation on effects of using segmented and helical tube fins on thermal performance and efficiency of a shell and tube heat exchanger

Numerical Simulations of the Flow Dynamics in a Tube with Inclined Fins Using Open-Source Software

Numerical analysis of magneto-radiated annular fin natural-convective heat transfer performance using advanced ternary nanofluid considering shape factors with heating source