Abstract:Solar air heater (SAH) is used to convert readily available solar energy into useful thermal energy. Several studies have been conducted with different roughness elements on the absorber plate. However, study with ribs which are placed slightly above the heated plate, termed as offset transverse ribs, are still scant in the literature. Such study would explain the effect of flow between the ribs and the absorber plate on heat transfer augmentation in a SAH. With this objective a 2-D numerical study is performed here by solving steady RANS equations with RNG k−ɛ turbulence model. The effect of offset transverse ribs on heat transfer, pressure drop and thermal enhancement factor ( TEF ) is investigated. The geometrical parameters, such as, relative gap ( α ), relative height ( β ) and relative pitch ( λ ) are varied in the range of 0.0–0.045, 0.015 to 0.09, and 0.0333 to 0.1, respectively. The performance of SAH is evaluated on the basis of highest enhancement in relative Nusselt number ( NuR/Nu ) and thermal enhancement factor ( TEF ). A slight gap between the ribs and the absorber plate ( α = 0.0075) is observed to yield better thermal performance than that for the attached ribs ( α = 0). The maximum enhancement in NuR/Nu is found to be 1.52 for α = 0.0075. However, increasing the gap (i.e., α ) prevents the flow reattachment with the absorber plate. Increase in rib height, on the other hand, is found to be more effective in heat transfer enhancement, but with a price of a significant enhancement in pressure drop. This leads to a reduction in the overall performance of SAH. Increment in pitch distance, however, reduces the enhancement in both Nusselt number and friction factor. By considering these three parameters, the highest TEF is found to be 1.042 for α=0.0075 , β=0.030 , and λ=0.0333 at Re equal to 13000. Finally, correlations for NuR and fR are derived as a function of the parameters investigated for helping the design of SAHs.

Enhancing heat transfer in rectangular solar air heater channels: a numerical exploration of multiple Boomerang-shaped roughness elements with variable gaps

Heat transfer and friction factor correlation for rhombus-shaped roughness geometry on the absorber plate of solar air collector

Experimental investigation on heat transfer and friction factor characteristics for novel hybrid roughness used in solar air heater

Exploring nusselt number and friction factor correlations for sphere-shaped roughness elements on the absorber to enhance solar air heater efficiency

Improved solar-thermal heat exchanger for space heating with surface roughness: A numerical parametric investigation and its optimization

Numerical analysis of a solar air heater with offset transverse ribs placed near the absorber plate

Enhancement of thermal efficiency and development of Nusselt number correlation for the solar air heater collector roughened with artificial ribs for thermal applications

Understanding thermo-fluidic characteristics of a triangular solar air heater having W-shaped rib-turbulators: A 3D CFD study

Heat transfer and fluid flow analysis of a solar air heater using conical jet impingement with sine-wave corrugation on absorber plate

Application of artificial intelligence to investigate the performance and flow pattern near staggered piece in V-ribs with aligned gaps roughness in solar air heater using relevant input parameters

Thermohydraulic performance parameter based experimental investigation of frustum shaped roughened solar air heater

Prediction of behavior of triangular solar air heater duct using V-down rib with multiple gaps and turbulence promoters as artificial roughness: A CFD analysis

Nusselt number and friction characteristics of solar air heater roughened with novel twisted V-shaped staggered ribs using liquid crystal thermography

Effect of heat transfer and pressure drop characteristics on the performance analysis of an artificially roughened solar air heater

Numerical analysis of solar air collector with trapezoidal ribbed absorber plate of indirect solar dryer: estimation of performance parameters with proposed pitch for better performance

A study on heat transfer enhancement for solar air heaters with ripple surface

THE EFFECT OF CORRUGATION ON HEAT TRANSFER AND PRESSURE DROP IN A SOLAR AIR HEATER: A NUMERICAL INVESTIGATION

Turbulent Heat Transfer Augmentation in a Square Channel by Augmenting the Flow Pattern with Novel Arc-Shaped Ribs

Revisiting the influence of artificial roughness shapes on heat transfer enhancement

Heat transfer and exergy analysis of solar air heater tube with helical corrugation and perforated circular disc inserts

Numerical study of the influence of amplitudes on heat transfer in a tube bundle