Abstract:Solar air heater (SAH) is used to convert readily available solar energy into useful thermal energy. Several studies have been conducted with different roughness elements on the absorber plate. However, study with ribs which are placed slightly above the heated plate, termed as offset transverse ribs, are still scant in the literature. Such study would explain the effect of flow between the ribs and the absorber plate on heat transfer augmentation in a SAH. With this objective a 2-D numerical study is performed here by solving steady RANS equations with RNG k−ɛ turbulence model. The effect of offset transverse ribs on heat transfer, pressure drop and thermal enhancement factor ( TEF ) is investigated. The geometrical parameters, such as, relative gap ( α ), relative height ( β ) and relative pitch ( λ ) are varied in the range of 0.0–0.045, 0.015 to 0.09, and 0.0333 to 0.1, respectively. The performance of SAH is evaluated on the basis of highest enhancement in relative Nusselt number ( NuR/Nu ) and thermal enhancement factor ( TEF ). A slight gap between the ribs and the absorber plate ( α = 0.0075) is observed to yield better thermal performance than that for the attached ribs ( α = 0). The maximum enhancement in NuR/Nu is found to be 1.52 for α = 0.0075. However, increasing the gap (i.e., α ) prevents the flow reattachment with the absorber plate. Increase in rib height, on the other hand, is found to be more effective in heat transfer enhancement, but with a price of a significant enhancement in pressure drop. This leads to a reduction in the overall performance of SAH. Increment in pitch distance, however, reduces the enhancement in both Nusselt number and friction factor. By considering these three parameters, the highest TEF is found to be 1.042 for α=0.0075 , β=0.030 , and λ=0.0333 at Re equal to 13000. Finally, correlations for NuR and fR are derived as a function of the parameters investigated for helping the design of SAHs.

Influence of solar insolation on energy and exergy efficiency of a rectangular duct solar air heater with various types of V rib roughness: An analytical approach

Effect of fabricated V-rib roughness experimentally investigated in a rectangular channel of solar air heater: a comprehensive review

Nusselt number and friction characteristics of solar air heater roughened with novel twisted V-shaped staggered ribs using liquid crystal thermography

Numerical analysis of a solar air heater with offset transverse ribs placed near the absorber plate

Understanding thermo-fluidic characteristics of a triangular solar air heater having W-shaped rib-turbulators: A 3D CFD study

Prediction of behavior of triangular solar air heater duct using V-down rib with multiple gaps and turbulence promoters as artificial roughness: A CFD analysis

Application of artificial intelligence to investigate the performance and flow pattern near staggered piece in V-ribs with aligned gaps roughness in solar air heater using relevant input parameters

Enhancement of thermal efficiency and development of Nusselt number correlation for the solar air heater collector roughened with artificial ribs for thermal applications

A detailed review on research, technology, configurations and application of wire ribs as artificial roughness in rectangular solar air heater duct

Thermodynamic performance evaluation of an indoor designed solar air heater duct equipped with V-down baffle blocks having racetrack-shaped staggered openings of varying aspect ratio – an experimental study

Experimental study of solar air heater with c shaped ribs coated with zeolite

Experimental investigation on heat transfer and friction factor characteristics for novel hybrid roughness used in solar air heater

Investigation on energy, economic, and environmental aspects of double-pass solar air heater

Exploring nusselt number and friction factor correlations for sphere-shaped roughness elements on the absorber to enhance solar air heater efficiency

Energetic, exergetic and enviro-economic analysis of parallel pass jet plate solar air heater with artificial roughness

Innovative cinque rib-roughened stimulators on performance improvement in triangular channel solar air heater

Effective thermal performance assessment for prismatic triangular solar air heater integrated with fins and turbulators

Environmental, economic, and performance assessment of solar air heater with inclined and winglet baffle

Improved solar-thermal heat exchanger for space heating with surface roughness: A numerical parametric investigation and its optimization

Parametric optimization of hybrid artificial roughness used in solar air heaters using multiple criteria decision making techniques

On the Solar Air Heater Thermal Enhancement and Flow Topology Using Differently Shaped Ribs Combined with Delta-Winglet Vortex Generators