Abstract:Solar air heater (SAH) is used to convert readily available solar energy into useful thermal energy. Several studies have been conducted with different roughness elements on the absorber plate. However, study with ribs which are placed slightly above the heated plate, termed as offset transverse ribs, are still scant in the literature. Such study would explain the effect of flow between the ribs and the absorber plate on heat transfer augmentation in a SAH. With this objective a 2-D numerical study is performed here by solving steady RANS equations with RNG k−ɛ turbulence model. The effect of offset transverse ribs on heat transfer, pressure drop and thermal enhancement factor ( TEF ) is investigated. The geometrical parameters, such as, relative gap ( α ), relative height ( β ) and relative pitch ( λ ) are varied in the range of 0.0–0.045, 0.015 to 0.09, and 0.0333 to 0.1, respectively. The performance of SAH is evaluated on the basis of highest enhancement in relative Nusselt number ( NuR/Nu ) and thermal enhancement factor ( TEF ). A slight gap between the ribs and the absorber plate ( α = 0.0075) is observed to yield better thermal performance than that for the attached ribs ( α = 0). The maximum enhancement in NuR/Nu is found to be 1.52 for α = 0.0075. However, increasing the gap (i.e., α ) prevents the flow reattachment with the absorber plate. Increase in rib height, on the other hand, is found to be more effective in heat transfer enhancement, but with a price of a significant enhancement in pressure drop. This leads to a reduction in the overall performance of SAH. Increment in pitch distance, however, reduces the enhancement in both Nusselt number and friction factor. By considering these three parameters, the highest TEF is found to be 1.042 for α=0.0075 , β=0.030 , and λ=0.0333 at Re equal to 13000. Finally, correlations for NuR and fR are derived as a function of the parameters investigated for helping the design of SAHs.

Experimental study of solar air heater with c shaped ribs coated with zeolite

Numerical analysis of a solar air heater with offset transverse ribs placed near the absorber plate

Nusselt number and friction characteristics of solar air heater roughened with novel twisted V-shaped staggered ribs using liquid crystal thermography

Innovative cinque rib-roughened stimulators on performance improvement in triangular channel solar air heater

Enhancement of thermal efficiency and development of Nusselt number correlation for the solar air heater collector roughened with artificial ribs for thermal applications

Effect of fabricated V-rib roughness experimentally investigated in a rectangular channel of solar air heater: a comprehensive review

Experimental study on the thermal performance of a solar air heater integrated with multi-geometry arrangements over the absorber plate

Influence of solar insolation on energy and exergy efficiency of a rectangular duct solar air heater with various types of V rib roughness: An analytical approach

Understanding thermo-fluidic characteristics of a triangular solar air heater having W-shaped rib-turbulators: A 3D CFD study

A detailed review on research, technology, configurations and application of wire ribs as artificial roughness in rectangular solar air heater duct

Exploring nusselt number and friction factor correlations for sphere-shaped roughness elements on the absorber to enhance solar air heater efficiency

Investigation on energy, economic, and environmental aspects of double-pass solar air heater

Experimental investigation on heat transfer and friction factor characteristics for novel hybrid roughness used in solar air heater

Prediction of behavior of triangular solar air heater duct using V-down rib with multiple gaps and turbulence promoters as artificial roughness: A CFD analysis

Application of artificial intelligence to investigate the performance and flow pattern near staggered piece in V-ribs with aligned gaps roughness in solar air heater using relevant input parameters

Heat transfer Enhancement of Impinging Jet-Corrugated Solar Air Heaters

Experimental Study of the Effect of Porous Media on the Performance of Single-Pass Solar Air Heater

Numerical analysis of solar air collector with trapezoidal ribbed absorber plate of indirect solar dryer: estimation of performance parameters with proposed pitch for better performance

Effect of channel depth ratio and absorber plate configuration on performance of a solar air heater

Thermal performance evaluation of a solar air heater integrated with helical tubes carrying phase change material

THE EFFECT OF CORRUGATION ON HEAT TRANSFER AND PRESSURE DROP IN A SOLAR AIR HEATER: A NUMERICAL INVESTIGATION