Abstract:Solar air heater (SAH) is used to convert readily available solar energy into useful thermal energy. Several studies have been conducted with different roughness elements on the absorber plate. However, study with ribs which are placed slightly above the heated plate, termed as offset transverse ribs, are still scant in the literature. Such study would explain the effect of flow between the ribs and the absorber plate on heat transfer augmentation in a SAH. With this objective a 2-D numerical study is performed here by solving steady RANS equations with RNG k−ɛ turbulence model. The effect of offset transverse ribs on heat transfer, pressure drop and thermal enhancement factor ( TEF ) is investigated. The geometrical parameters, such as, relative gap ( α ), relative height ( β ) and relative pitch ( λ ) are varied in the range of 0.0–0.045, 0.015 to 0.09, and 0.0333 to 0.1, respectively. The performance of SAH is evaluated on the basis of highest enhancement in relative Nusselt number ( NuR/Nu ) and thermal enhancement factor ( TEF ). A slight gap between the ribs and the absorber plate ( α = 0.0075) is observed to yield better thermal performance than that for the attached ribs ( α = 0). The maximum enhancement in NuR/Nu is found to be 1.52 for α = 0.0075. However, increasing the gap (i.e., α ) prevents the flow reattachment with the absorber plate. Increase in rib height, on the other hand, is found to be more effective in heat transfer enhancement, but with a price of a significant enhancement in pressure drop. This leads to a reduction in the overall performance of SAH. Increment in pitch distance, however, reduces the enhancement in both Nusselt number and friction factor. By considering these three parameters, the highest TEF is found to be 1.042 for α=0.0075 , β=0.030 , and λ=0.0333 at Re equal to 13000. Finally, correlations for NuR and fR are derived as a function of the parameters investigated for helping the design of SAHs.

On the Solar Air Heater Thermal Enhancement and Flow Topology Using Differently Shaped Ribs Combined with Delta-Winglet Vortex Generators

Thermal Enhancement by Using Grooves and Ribs Combined with Delta-Winglet Vortex Generator in a Solar Receiver Heat Exchanger

Thermal Performance Improvement of a Solar Air Heater Fitted with Winglet Vortex Generators

Understanding thermo-fluidic characteristics of a triangular solar air heater having W-shaped rib-turbulators: A 3D CFD study

Thermo-hydraulic performance of solar air heater with built-in one-eighth sphere vortex generators

Numerical analysis of a solar air heater with offset transverse ribs placed near the absorber plate

Turbulent Heat Transfer Augmentation in a Square Channel by Augmenting the Flow Pattern with Novel Arc-Shaped Ribs

Numerical investigation of heat transfer using a novel punched vortex generator

THE AUGMENTATION OF INTERNAL TIP HEAT TRANSFER IN GAS TURBINE BLADES USING A PAIR OF DELTA-WINGLET VORTEX GENERATORS

Enhancement of thermal efficiency and development of Nusselt number correlation for the solar air heater collector roughened with artificial ribs for thermal applications

Thermal performance augmentation of microchannel using curved rectangular winglet vortex generators having rectangular perforation

Turbulent Flow Structure and Heat Transfer Mechanisms over Surface Vortex Structures of Micro V-shaped Ribs and Dimples

Heat transfer performance and flow characteristics of solar air heaters with inclined trapezoidal vortex generators

Experimental Study of Flow and Heat Transfer of High-performance ribs for Internal Cooling of Gas Turbine Blades

Heat Transfer and Flow Characteristics in a Circular Tube Fitted with Rectangular Winglet Vortex Generators

A study on heat transfer enhancement for solar air heaters with ripple surface

Heat Transfer Characteristics of Blade Internal Tip Surface by Arrays of Delta-Winglet Vortex Generator Pairs

Numerical and Experimental Investigations of Micro Thermal Performance in a Tube with Delta Winglet Pairs

Experimental Study of Reverse Flow Solar Air Heater Having Perforation and Delta Wing on Absorber Plate

Novel self-join winglet vortex generators for enhanced heat transfer of turbulent airflow in round tubes

Thermal performance assessment in a fin-and-oval-tube heat exchanger with delta winglet vortex generators