Abstract:Solar air heater (SAH) is used to convert readily available solar energy into useful thermal energy. Several studies have been conducted with different roughness elements on the absorber plate. However, study with ribs which are placed slightly above the heated plate, termed as offset transverse ribs, are still scant in the literature. Such study would explain the effect of flow between the ribs and the absorber plate on heat transfer augmentation in a SAH. With this objective a 2-D numerical study is performed here by solving steady RANS equations with RNG k−ɛ turbulence model. The effect of offset transverse ribs on heat transfer, pressure drop and thermal enhancement factor ( TEF ) is investigated. The geometrical parameters, such as, relative gap ( α ), relative height ( β ) and relative pitch ( λ ) are varied in the range of 0.0–0.045, 0.015 to 0.09, and 0.0333 to 0.1, respectively. The performance of SAH is evaluated on the basis of highest enhancement in relative Nusselt number ( NuR/Nu ) and thermal enhancement factor ( TEF ). A slight gap between the ribs and the absorber plate ( α = 0.0075) is observed to yield better thermal performance than that for the attached ribs ( α = 0). The maximum enhancement in NuR/Nu is found to be 1.52 for α = 0.0075. However, increasing the gap (i.e., α ) prevents the flow reattachment with the absorber plate. Increase in rib height, on the other hand, is found to be more effective in heat transfer enhancement, but with a price of a significant enhancement in pressure drop. This leads to a reduction in the overall performance of SAH. Increment in pitch distance, however, reduces the enhancement in both Nusselt number and friction factor. By considering these three parameters, the highest TEF is found to be 1.042 for α=0.0075 , β=0.030 , and λ=0.0333 at Re equal to 13000. Finally, correlations for NuR and fR are derived as a function of the parameters investigated for helping the design of SAHs.

Effect of the partial blockage in the exit of the mixing channel on thermo - Hydraulic performance of the multi – Pass jet plate solar air heater

Numerical Investigation on the Performance of a Solar Air Heater Using Inclined Impinging Jets on Absorber Plate with Parallel and Crossing Orientation of Nozzles

Experimental study on the thermal performance of a solar air heater integrated with multi-geometry arrangements over the absorber plate

Investigation on energy, economic, and environmental aspects of double-pass solar air heater

Heat transfer Enhancement of Impinging Jet-Corrugated Solar Air Heaters

Thermohydraulic performance parameter based experimental investigation of frustum shaped roughened solar air heater

Effect of channel depth ratio and absorber plate configuration on performance of a solar air heater

Thermal Evaluation of a Double-Pass Unglazed Solar Air Heater with Perforated Plate and Wire Mesh Layers

Heat transfer and fluid flow analysis of a solar air heater using conical jet impingement with sine-wave corrugation on absorber plate

An Experimental Study Of Thermal Performance Of A Two-Phase Loop Thermosyphon (Tplt)-Based Steam Generator: Effects Of Thermal Boundary Conditions

Energetic, exergetic and enviro-economic analysis of parallel pass jet plate solar air heater with artificial roughness

Experimental Study of the Effect of Porous Media on the Performance of Single-Pass Solar Air Heater

Thermal Performance Factor of Impinging Jet‐Angled Corrugated Solar Air Heaters

Experimental study on thermal performance of reverse flow solar collector for dual heating applications

Experimental investigation on heat transfer and friction factor characteristics for novel hybrid roughness used in solar air heater

Influence of nozzle profile on submerged pipe jet impingement heat transfer

THE EFFECT OF CORRUGATION ON HEAT TRANSFER AND PRESSURE DROP IN A SOLAR AIR HEATER: A NUMERICAL INVESTIGATION

Experimentally validated axisymmetric simulation for thermo-fluid performance of an active flat-plate solar water heater at low flow rates

Investigation of the effect of dimensional and non-dimensional parameters on the performance of pitch-varied staggered arranged dimple solar air heaters

Thermodynamic performance evaluation of an indoor designed solar air heater duct equipped with V-down baffle blocks having racetrack-shaped staggered openings of varying aspect ratio – an experimental study

Numerical analysis of a solar air heater with offset transverse ribs placed near the absorber plate