Abstract:Solar air heater (SAH) is used to convert readily available solar energy into useful thermal energy. Several studies have been conducted with different roughness elements on the absorber plate. However, study with ribs which are placed slightly above the heated plate, termed as offset transverse ribs, are still scant in the literature. Such study would explain the effect of flow between the ribs and the absorber plate on heat transfer augmentation in a SAH. With this objective a 2-D numerical study is performed here by solving steady RANS equations with RNG k−ɛ turbulence model. The effect of offset transverse ribs on heat transfer, pressure drop and thermal enhancement factor ( TEF ) is investigated. The geometrical parameters, such as, relative gap ( α ), relative height ( β ) and relative pitch ( λ ) are varied in the range of 0.0–0.045, 0.015 to 0.09, and 0.0333 to 0.1, respectively. The performance of SAH is evaluated on the basis of highest enhancement in relative Nusselt number ( NuR/Nu ) and thermal enhancement factor ( TEF ). A slight gap between the ribs and the absorber plate ( α = 0.0075) is observed to yield better thermal performance than that for the attached ribs ( α = 0). The maximum enhancement in NuR/Nu is found to be 1.52 for α = 0.0075. However, increasing the gap (i.e., α ) prevents the flow reattachment with the absorber plate. Increase in rib height, on the other hand, is found to be more effective in heat transfer enhancement, but with a price of a significant enhancement in pressure drop. This leads to a reduction in the overall performance of SAH. Increment in pitch distance, however, reduces the enhancement in both Nusselt number and friction factor. By considering these three parameters, the highest TEF is found to be 1.042 for α=0.0075 , β=0.030 , and λ=0.0333 at Re equal to 13000. Finally, correlations for NuR and fR are derived as a function of the parameters investigated for helping the design of SAHs.

Investigation of the effect of dimensional and non-dimensional parameters on the performance of pitch-varied staggered arranged dimple solar air heaters

Investigation on energy, economic, and environmental aspects of double-pass solar air heater

Experimental Study of the Effect of Porous Media on the Performance of Single-Pass Solar Air Heater

Experimental study on the thermal performance of a solar air heater integrated with multi-geometry arrangements over the absorber plate

Experimental investigation and optimization of dimple-roughened impinging jet solar air collector using a novel AHP-MABAC approach

Environmental, economic, and performance assessment of solar air heater with inclined and winglet baffle

Numerical analysis of a solar air heater with offset transverse ribs placed near the absorber plate

Impact of corrugated duct and heat storage element on the performance of a low-cost solar air heater under forced air circulation: an experimental study

Numerical analysis of solar air collector with trapezoidal ribbed absorber plate of indirect solar dryer: estimation of performance parameters with proposed pitch for better performance

Effect of channel depth ratio and absorber plate configuration on performance of a solar air heater

Performance analysis of a serrated absorber plate solar air heater with paraffin wax storage

Experimental analysis of a solar air heater using waste mild steel chips as a sensible heat storage material

Experimental Study of Reverse Flow Solar Air Heater Having Perforation and Delta Wing on Absorber Plate

Thermohydraulic performance parameter based experimental investigation of frustum shaped roughened solar air heater

Thermal Evaluation of a Double-Pass Unglazed Solar Air Heater with Perforated Plate and Wire Mesh Layers

Turbulent flow-thermal-thermodynamic characteristics of a solar air heater with spiral fins

Exploring nusselt number and friction factor correlations for sphere-shaped roughness elements on the absorber to enhance solar air heater efficiency

Influence of pentagonal corrugated absorber sheet on heat transfer behavior of solar air collector: numerical analysis with optimized corrugation dimensions

Heat transfer Enhancement of Impinging Jet-Corrugated Solar Air Heaters

Numerical Investigation on the Performance of a Solar Air Heater Using Inclined Impinging Jets on Absorber Plate with Parallel and Crossing Orientation of Nozzles

Parametric optimization of hybrid artificial roughness used in solar air heaters using multiple criteria decision making techniques