Abstract:A series of Ti-Nb binary oxide were synthesized by co-precipitation as supports to prepare Cu/Ti-Nb mixed oxide catalysts through wetness impregnation. The novel catalyst 0.8%Cu/Ti2NbOx exhibited an excellent catalytic activity and N-2 selectivity with a broad operation temperature (250-425 degrees C) under a gas hourly space velocity (GHSV) of 177,000 h(-1) for the selective catalytic reduction of NOx with NH3. A series of analytical techniques including high resolution transmission electron microscopy (HRTEM), N-2-physisorption, X-ray diffraction (XRD), Laser Raman spectra (LRS), X-ray photoelectron spectroscopy (XPS), electron paramagnetic resonance (EPR), NH3 temperature-programmed desorption (NH3-TPD), H-2 temperature-programmed reduction (H-2-TPR) and in situ diffuse reflectance infrared Fourier transform spectroscopy (in situ DRIFTS) were used to investigate the correlations among catalyst structure, surface properties and catalytic performance. For the support Ti2NbOx, the specific surface area was larger than that of TiO2, promoting the high dispersion of the active component. Also, the surface acid sites were increased by addition of niobium oxide species and the redox capability of the support was enhanced by doping copper species. Moreover, the introduction of copper species effectively enhanced the catalytic performance within 225-400 degrees C. The copper species mainly existed as isolated Cu2+ and non-isolated Cu2+ and the isolated Cue(2+) ions played a significant role in the high NH3-SCR performance over 0.8%Cu/Ti2NbOx catalyst. Hydrothermal aging treatment experiment demonstrated that 0.8%Cu/Ti2NbOx catalyst had an excellent hydrothermal stability. In addition, water vapor or/and SO2 had a slightly reversible inhibition influence on the catalytic performance over 0.8%Cu/Ti2NbOx, indicating that it was a promising candidate for NH3-SCR catalyst in the future practical application. The reaction pathway over 0.8%Cu/Ti2NbOx catalyst followed both Eley-Rideal mechanism and Langmuir-Hinshelwood mechanism at 225 degrees C. (C) 2017 Elsevier B.V. All rights reserved.

Study on three denitration catalysts doped with transition metal oxides using titanium dioxide as a carrier

Catalytic performance of MnO 2-CeO 2/Ti 0.25Zr 0.25Al 0.5O 1.75 monolith catalyst for low temperature selective catalytic reduction of NO with NH 3

Tailoring the Proceeding of the NH3-SCO and NH3-SCR Reactions over FeOx Catalysts by Modifying with NbOx

Novel Ultrasonic-Modified MnOx/TiO2 for Low-Temperature Selective Catalytic Reduction (SCR) of NO with Ammonia.

Novel Mn-Ce-Ti Mixed-Oxide Catalyst for the Selective Catalytic Reduction of NOx with NH₃.

Titania-Samarium-Manganese Composite Oxide for the Low-Temperature Selective Catalytic Reduction of NO with NH3

Enhanced Selective Catalytic Reduction of NO with NH3 Via Porous Micro-Spherical Aggregates of Mn–Ce–Fe–Ti Mixed Oxide Nanoparticles

Advanced Mnox/Tio2 Catalyst with Preferentially Exposed Anatase {001} Facet for Low-Temperature Scr of No

Enhancing the Deno Performance of MnO /Ceo2-Zro2 Nanorod Catalyst for Low-Temperature NH3-SCR by TiO2 Modification

Construction of Fe2O3 Loaded and Mesopore Confined Thin-Layer Titania Catalyst for Efficient NH3-SCR of NOx with Enhanced H2O/SO2 Tolerance

Molybdenum-containing oxide catalysts for selective catalytic reduction of NOx with NH3

Promotional Synergistic Effect of Cu and Nb Doping on a Novel Cu/Ti-Nb Ternary Oxide Catalyst for the Selective Catalytic Reduction of NOx with NH3

Preparation of MnOx-MoO3/TiO2-Al2O3 Catalyst and Its SCR Denitration Performance

Promotional Role of the TiOx Nanorod Arrays As a Support to Load MnOx for Low-Temperature NH3-Selective Catalytic Reduction of NOx: Comparison of Two Preparation Strategies

Insights into the Highly Efficient Co Modified MnSm/Ti Catalyst for Selective Catalytic Reduction of NOx with NH3 at Low Temperature

Synthesis of novel Co(3-x)MnxO4@TiO2 core-shell catalyst for low-temperature NH3-SCR of NOx with enhanced SO2 tolerance

Effect of transition metals addition on the catalyst of manganese/titania for low-temperature selective catalytic reduction of nitric oxide with ammonia

Enhancement of Low-Temperature Catalytic Activity over a Highly Dispersed Fe–Mn/Ti Catalyst for Selective Catalytic Reduction of NOx with NH3

A High-Performance Mn/TiO2 Catalyst with a High Solid Content for Selective Catalytic Reduction of NO at Low-Temperatures

Ti3+ doped V2O5/TiO2 catalyst for efficient selective catalytic reduction of NOx with NH3

Identifying The Descriptor Governing No Oxidation On Mullite Sm(Y, Tb, Gd, Lu)Mn2o5 For Diesel Exhaust Cleaning