Abstract:Highlights • Gas-liquid segment length in microchannel is successfully manipulated using a high-speed valve. • Segment length decreases regularly with the increase of valve frequency within a wide range. • Deviation of segment length from theoretical value is explained by direct evidence or mechanism. • The gas-to-liquid flow ratio between 0.7 and 1.2 guarantees a steady segmented flow. • Correlation for predicting segment length with valve frequency is proposed based on mass balance. Segmented flow, one of the most important flow patterns in microchannels, has been widely employed in gas–liquid microreactor systems because it enhances mass transfer through the biphasic interface. The segment length is determined by the channel parameters (e.g., size, material type), fluid flow rate, and fluid properties. Thus, it is difficult to manipulate the gas–liquid segment length without affecting the residence time of the fluid. In this work we successfully achieved regularly segment length control by introducing a high-speed valve into a gas–liquid microchannel system while varying the frequency of the valve installed in the gas-phase tube to allow gas and liquid segment lengths to be controlled within a large range. In contrast, the segment lengths were almost constant under the same conditions without the high-speed valve. Furthermore, a gas/liquid flow rate ratio in the range of 0.7–1.2 was deemed necessary for steady segmented flow. Finally, a correlation was proposed to predict the segment length using parameters such as valve frequency and fluid flow rate, and it matched the experimental data well. This segment length control strategy will improve the performance of gas–liquid reactions in microreactors and advance the design of microreactor systems.

Investigation of mass transfer in valve-controlled gas–liquid segmented flow

Controlling gas–liquid segment length in microchannels using a high-speed valve

Liquid-liquid Two-Phase Flow and Mass Transfer in T-shaped Micro-Channel Network

Mass transfer performance of gas-liquid segmented flow in microchannels

Experimental and Numerical Simulation on Sequential Three Phase Jet-Loop Reactor

Hydrodynamics and Mass Transfer Performance of Gas–liquid Microflow in Viscous Liquids

Mass transfer mechanism and relationship of gas–liquid annular flow in a microfluidic cross-junction device

Experimental Investigation on Submerged Gas-Liquid Mixture Injection into Water Through A Micro-Channel

Mass transfer characteristic in the formation stage of gas-liquid segmented flow in microchannel

Numerical investigation of mass transfer behavior of a gas–liquid two‐phase Taylor flow in a microchannel by a volume‐of‐fluid multiphase flow system

Bubble/Droplet Formation and Mass Transfer During Gas-Liquid-Liquid Segmented Flow with Soluble Gas in A Microchannel

Modeling Investigation of Mass Transfer of Gas–liquid Concurrent Flow Processes

Experimental Study on Gas-Liquid Flow Characteristics of Submerged Air Jets

Flow Regulation Performance Analysis of Microfluidic Passive Valve for High Throughput Liquid Delivery

Remarkable improvement of gas–liquid mass transfer by modifying the structure of conventional T‐junction microchannel

Study on Hydrodynamics and Mass Transfer Characteristic of a New Gas-liquid Reactor

Gas–liquid–liquid Slug Flow and Mass Transfer in Hydrophilic and Hydrophobic Microreactors

Effect of Mixing on Mass Transfer Characterization in Continuous Slugs and Dispersed Droplets in Biphasic Slug Flow Microreactors

A strategy for regulation of gas–liquid microflow patterns by changing gas kinetic energy

Liquid-liquid flow pattern and mass transfer in a rotating millimeter channel reactor

The study on mass transfer characteristics of the intensified gas-liquid jet stirred reactor