Abstract:Highlights • Gas-liquid segment length in microchannel is successfully manipulated using a high-speed valve. • Segment length decreases regularly with the increase of valve frequency within a wide range. • Deviation of segment length from theoretical value is explained by direct evidence or mechanism. • The gas-to-liquid flow ratio between 0.7 and 1.2 guarantees a steady segmented flow. • Correlation for predicting segment length with valve frequency is proposed based on mass balance. Segmented flow, one of the most important flow patterns in microchannels, has been widely employed in gas–liquid microreactor systems because it enhances mass transfer through the biphasic interface. The segment length is determined by the channel parameters (e.g., size, material type), fluid flow rate, and fluid properties. Thus, it is difficult to manipulate the gas–liquid segment length without affecting the residence time of the fluid. In this work we successfully achieved regularly segment length control by introducing a high-speed valve into a gas–liquid microchannel system while varying the frequency of the valve installed in the gas-phase tube to allow gas and liquid segment lengths to be controlled within a large range. In contrast, the segment lengths were almost constant under the same conditions without the high-speed valve. Furthermore, a gas/liquid flow rate ratio in the range of 0.7–1.2 was deemed necessary for steady segmented flow. Finally, a correlation was proposed to predict the segment length using parameters such as valve frequency and fluid flow rate, and it matched the experimental data well. This segment length control strategy will improve the performance of gas–liquid reactions in microreactors and advance the design of microreactor systems.

Controlling gas–liquid segment length in microchannels using a high-speed valve

Investigation of mass transfer in valve-controlled gas–liquid segmented flow

PRESSURE FLUCTUATIONS OF LIQUID-LIQUID SLUG FLOW IN CROSS-JUNCTION SQUARE MICROCHANNELS

Flow Regulation Performance Analysis of Microfluidic Passive Valve for High Throughput Liquid Delivery

A strategy for regulation of gas–liquid microflow patterns by changing gas kinetic energy

Mass transfer performance of gas-liquid segmented flow in microchannels

Experimental Investigation on Submerged Gas-Liquid Mixture Injection into Water Through A Micro-Channel

Bubble/Droplet Formation and Mass Transfer During Gas-Liquid-Liquid Segmented Flow with Soluble Gas in A Microchannel

Flow behavior through microfluidic valves

Hydrodynamics and Mass Transfer Performance of Gas–liquid Microflow in Viscous Liquids

Mass transfer mechanism and relationship of gas–liquid annular flow in a microfluidic cross-junction device

Control and ultrasonic actuation of a gas-liquid interface in a microfluidic chip

Periodic and aperiodic bubbling in submerged gas-liquid jets through a micro-channel

Manipulation of gas-liquid-liquid systems in continuous flow microreactors for efficient reaction processes

Gas–liquid–liquid Slug Flow and Mass Transfer in Hydrophilic and Hydrophobic Microreactors

Mass transfer characteristic in the formation stage of gas-liquid segmented flow in microchannel

Regulation of gas-liquid Taylor flow by pulsating gas intake in micro-channel

Remarkable improvement of gas–liquid mass transfer by modifying the structure of conventional T‐junction microchannel

Liquid–liquid Mixing Enhancement Rules by Microbubbles in Three Typical Micro-Mixers

Controlling flow in microfluidic channels with a manually actuated pin valve

Gas–liquid flow in T-junction microfluidic devices with a new perpendicular rupturing flow route