Abstract:The buildings of the city of Douala in Cameroon have been experiencing degradation for several decades due to the climate characterized by high humidity and oppressive heat. As a result, large grayish or black stains can be observed on these buildings. We sometimes witness the subsidence of the slab of the balconies, the cracking of the walls and the collapse of the buildings worn by the humidity. These damages are generally caused by infiltration and capillary rise. In addition, it has been demonstrated that people living in damp buildings are at risk of illnesses such as asthma and lung infections. Therefore, the novelty of this work is threefold: (i) it proposes for the very first time a numerical study of the transport of humidity and heat through the porous walls of buildings constructed with concrete material, the main construction material in the city of Douala; (ii) It was determined what level of indoor thermal comfort was appropriate for sleeping inside a real three-dimensional G+1 complex residential building constructed with concrete blocks; and (iii) Using the geographical coordinates, and time data, the sun radiation's direction of incidence was assessed throughout the simulation. The computation was performed using Comsol Multiphysics 6.0 software. The distributions of temperature, relative humidity as well as moisture level were presented at various periods. It appears from the results that face to this high humidity, the concrete material retains a large quantity of water for a considerable periods of time, which weakens the steel reinforcement of concrete which is corroded by rust. The computation of thermal comfort in the 3D building showed that the various rooms of the building were not comfortable during the night since temperature inside the building increased progressively due to diffusion of heat. In addition, the numerical solutions indicated that the energy stored within the walls diffused from the external walls to the internal walls during the night. It was also demonstrated that the walls of the building were warmer than the windows, doors and the roof at the computational times, which simply revealed a greater storage capacity of heat in the concrete blocks material. The findings highlighted that the temperature decreased rapidly in a thickness of 0.06 m of the concrete block during the nine days and this decrease was attenuated in the second part of the thickness of the concrete block (0.14 m).

Numerical investigation of the thermal behaviour of external multilayer walls to ensure the buildings retrofitting thermal insulation

Numerical Study on Wall Insulation Construction Affecting the Energy Consumption under the Intermittent and Loculose Energy Use

Numerical Study On Energy Consumption Characteristics For Wall Insulation Structure In Hot Summer And Cold Winter Zone

Numerical and experimental analysis of building walls thermal performance

Performance and Economical Analysis of Different Insulating Materials Used to Reduce the Heat Load of an Existing Residential Building

Numerical simulation of the thermal behavior of Silica Aerogel in a commercial building in Tunisia

Numerical study of the vertical shading devices effect on the thermal performance of promotional apartments in hot dry climate of Algeria

An innovative method to determine optimum insulation thickness based on non-uniform adaptive moving grid

Reducing the cost of energy used for adaptation by using different exterior wall covering materials in Iraq

Energy savings potential by integrating Phase Change Material into hollow bricks: The case of Moroccan buildings

Numerical Study on the Thermal Insulation of Smart Windows Embedded with Low Thermal Conductivity Materials to Improve the Energy Efficiency of Buildings

Study of the economical and optimum thermal insulation thickness for buildings in a wet and hot tropical climate: Case of Cameroon

Thermal performance analysis of hollow brick walls in hot and dry climatic zones

Innovative passive techniques and PCM integration in building envelopes for enhanced energy efficiency in desert regions

Exploring building’s envelope thermal behavior of the neo-vernacular residential architecture in a hot and dry climate region of Algeria

Numerical study and experimental validation of heat transfer in a CenoPCM reinforced multi-layered meta-material wall for energy efficient buildings

Numerical simulation and thermal performance of hybrid brick walls embedding a phase change material for passive building applications

Thermal performance and energy saving using phase change materials (PCM) integrated in building walls

An efficient numerical method for a long-term simulation of heat and mass transfer: the case of an insulated rammed earth wall

Numerical computation of heat transfer, moisture transport and thermal comfort through walls of buildings made of concrete material in the city of Douala, Cameroon: An ab initio investigation

Case studies on energy performance of walling materials in various regions