Abstract:To achieve net-zero carbon emissions in a building's lifecycle, a comprehensive approach is required, addressing both embodied and operational carbon footprints. To support this goal, this study assesses the environmental, hygrothermal, and mechanical characteristics of different carbon-free adobe bricks bio-sourced with straw and evaluates their impacts on improving the energy performance of a one-story case study building located in a semi-arid climate. At the material scale, the mechanical performance, hydrothermal behavior, and durability of carbon-free straw-reinforced adobes, with weight percentages of 0, 1, 2, 3, and 4%, at different sizes: long straw (100–200 mm) and crushed straw (5–25 mm) were studied. The results show that incorporating straw into bricks increases porosity, enabling the production of lightweight bricks that comply with Moroccan standards for lightweight structures, possessing a density lower than the accepted limit of 1750 kg/m3. Furthermore, the thermomechanical properties of reinforced adobes were considerably improved compared to non-reinforced ones, with a gain in mechanical compressive and flexural strengths of 31.2% and 184%, respectively. However, it is important to note that in the case of adobe bricks reinforced with long straw (BLS), the findings revealed that, unlike other thermomechanical properties, long straw has a negative effect on compressive strength. Additionally, thermal conductivity decreased by 93.8% and 86.8% for a 4% inclusion of long and crushed straw, respectively. At the building scale, the indoor hygrothermal comfort was evaluated with respect the hot, semi-arid region in southern Morocco. The results show that the reinforced adobe material is able to reduce the indoor temperature of the case study building from 3 °C to 12 °C during the summer time, compared to the outdoor temperature, with a time lag of up to 5 h between the interior and exterior. Moreover, it successfully maintained diurnal indoor air temperature fluctuation within 2 °C. In addition, indoor relative humidity remained in the recommended 40%–65% by ASHRAE Standard 62.1–2022, over 78% during the monitoring period, even when the outside relative humidity fluctuated significantly (5–95%). Finally, a Morris-based sensitivity analysis was carried out on nine design parameters of the case-study building to assess the impact of varying the thermal properties of reinforced adobe bricks on cooling and heating energy performance, respectively. Thermal conductivity was found to have a significant impact on cooling energy demands and a lesser influence on heating demands. The study also indicates that straw-reinforced adobe bricks can improve cooling energy performance by up to 17.8% without compromising the overall embodied carbon of the building envelope.

Thermal performance analysis of hollow brick walls in hot and dry climatic zones

Energy savings potential by integrating Phase Change Material into hollow bricks: The case of Moroccan buildings

Numerical and experimental analysis of building walls thermal performance

Numerical investigation of the thermal behaviour of external multilayer walls to ensure the buildings retrofitting thermal insulation

Thermal Performance of Double Walls With Polystyrene Bead Insufflation

An empirical study on the thermal behavior of rice husk in eco-friendly brick for external walls of buildings

Numerical simulation and thermal performance of hybrid brick walls embedding a phase change material for passive building applications

Case studies on energy performance of walling materials in various regions

Thermal performance of a building envelope including microencapsulated phase change materials (PCMs): A multiscale experimental and numerical investigation

Comparative Thermal Evaluation of Two Systems of Wall Panels Exposed to Hot and Arid Arabian Environmental Weather Conditions

Comparative thermal analysis of extruded ceramic products between multi perforated brick and modified bricks in cells distribution

Numerical study of the vertical shading devices effect on the thermal performance of promotional apartments in hot dry climate of Algeria

Street Design Strategies Based on Spatial Configurations and Building External Envelopes in Relation to Outdoor Thermal Comfort in Arid Climates

Effect of straw fibers addition on hygrothermal and mechanical properties of carbon-free adobe bricks: From material to building scale in a semi-arid climate

Effects of thermal mass on transient thermal performance of concrete-based walls and energy consumption of an office building

Optimizing Building Thermal Insulation: The Impact of Brick Geometry and Thermal Coefficient on Energy Efficiency and Comfort

Thermal performance and energy saving using phase change materials (PCM) integrated in building walls

Thermal Performance Assessment of Concrete Walls Using Different Phase Change Materials

The Effect of Exterior Wall Color on Thermal Performance of Building

Assessment of hygrothermal performance of raw earth envelope at overall building scale

The influence of external temperature and convective heat exchange with an environment on heat transfer inside phase change material embedded brick