Abstract:Phase change materials (PCMs) have the ability to store/release huge latent heat during phase change. When used in the building envelope, the PCM wall panel can potentially enhance the building's operation by reducing energy requirements to maintain thermal comfort, downsizing heating/cooling equipment, and shifting the peak load from the electrical grid. This work deals with the numerical simulation of the thermal performance of brick walls with embedded PCMs using an enthalpy-porosity approach. An implicit finite volume method is used for the numerical solution of conservation equations for mass, momentum, and energy. The results gathered have been judged in good agreement with the experiments. It turns out that incorporating PCM into brick masonry can both reduce maximum temperatures up to 3 °C and mitigate daily fluctuations. A higher PCM amount incorporated in a masonry wall reduces the energy consumption required to ensure a suitable comfort temperature. The inward heat transfer decreases if the PCM amount required for efficient storage is 20–30%. Finally, the proposed predictions seem to be useful for developing better storage of the heat energy and latent heat used in buildings to improve their overall energy efficiency.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is: how to improve the thermal performance of buildings by embedding phase - change materials (PCM) in brick walls, thereby reducing the energy required to maintain thermal comfort, downsizing heating/cooling equipment, and shifting the peak load of the power grid. Specifically, the research focuses on using the enthalpy - porosity method to conduct numerical simulations of hybrid brick walls with embedded PCM to evaluate their thermal performance. ### Research Background and Problem Description With the continuous increase in building energy consumption, especially in heating, ventilation, and air - conditioning (HVAC), it has become particularly important to find effective energy - saving measures. Phase - change materials (PCM) have become a potential solution due to their ability to store and release a large amount of latent heat during the phase - change process. Applying PCM to building envelopes can significantly improve the thermal performance of buildings, reduce energy consumption, and improve indoor thermal comfort. However, although there have been many studies on the application of PCM in building materials, there are relatively few studies on its application in brick walls, especially in the horizontal clay brick walls widely used in Mediterranean countries. Therefore, this paper aims to explore the effect of embedding micro - encapsulated PCM in brick walls through numerical simulation and experimental verification, in order to provide references for future architectural design. ### Main Research Contents 1. **Numerical Simulation**: Use the implicit finite - volume method (FVM) to solve the mass, momentum, and energy conservation equations to simulate the thermal behavior of PCM in brick walls. 2. **Experimental Verification**: Verify the accuracy of the numerical model through experimental data to ensure the reliability of the simulation results. 3. **Parameter Study**: Analyze the influence of different factors (such as the mass fraction of PCM, the phase - change temperature, the thickness of the insulation layer, etc.) on the thermal performance of brick walls. ### Research Objectives - Evaluate the thermal performance of brick walls with embedded PCM under different conditions. - Explore the optimal incorporation amount of PCM and its influence on indoor temperature fluctuations. - Propose suggestions for optimizing the thermal performance of building envelopes, especially under Mediterranean climate conditions. ### Key Conclusions The research shows that embedding PCM in brick walls can effectively reduce the maximum temperature by 3°C and reduce the daily temperature difference fluctuation. Increasing the incorporation amount of PCM can further reduce the energy consumption required to maintain a suitable and comfortable temperature. When the PCM incorporation amount is 20 - 30%, the inward heat transfer is significantly reduced, indicating that the application of PCM in building envelopes has great energy - saving potential. In conclusion, this research provides theoretical basis and technical support for the development of more efficient building envelopes and helps promote the development of green buildings.

Numerical simulation and thermal performance of hybrid brick walls embedding a phase change material for passive building applications

Numerical Study on the Effect of Incorporating Phase Change Materials in a Wall

Simulation of phase change materials in building walls using effective heat capacity model by recent numerical methods

Computational and experimental analysis of PCM-infused brick for sustainable heat regulation

Building brick thermal analysis containing a new bio-based phase change material

Thermal behavior analysis of hollow bricks filled with phase-change material (PCM)

Thermal performance of a building envelope including microencapsulated phase change materials (PCMs): A multiscale experimental and numerical investigation

Heat transfer reduction in buildings by embedding phase change material in multi-layer walls: Effects of repositioning, thermophysical properties and thickness of PCM

Enhancing thermal comfort in buildings through the integration of phase change material on the building envelope: a simulation study

Application of Phase Change Materials (PCMs) in Building Walls: A Review

Study on Phase Change Material in Grooved Bricks for Energy Efficiency of the Buildings

Numerical simulations on the thermal performance of ventilated walls with passive solar heating and latent heat storage in winter

Experimental assessment of concrete masonry units integrated with insulation and phase change material: A wall-pattern study

Energy savings potential by integrating Phase Change Material into hollow bricks: The case of Moroccan buildings

Impact of phase change materials and brick thickness on thermal comfort in free-floating mode

Thermal performance and energy saving using phase change materials (PCM) integrated in building walls

Thermal Performance Assessment of Concrete Walls Using Different Phase Change Materials

Dynamic integration of phase change material in walls for enhancing building thermal performance—A novel self-adaptive method for moving PCM layer

Phase Change Materials Integrated Into the Building Envelope to Improve Energy Efficiency and Thermal Comfort

Innovative passive techniques and PCM integration in building envelopes for enhanced energy efficiency in desert regions

Exploring the Potential of Phase Change Material for Thermal Energy Storage in Building Envelopes