Abstract:Global warming is mainly triggered by the consumption of fossil fuels and the phenomenon has shaken the global community in the form of climate change resulting in frequent heat waves leading to drought and catastrophic wildfires. At present increase in global average temperature is further increasing energy demands for maintaining thermal comfort inside the building envelope. In such circumstances building materials with improved thermal performance can reduce thermal load inside the building envelope. The study aimed to improve the thermal performance of clay brick, which is a key building material, by incorporating organic eutectic phase change materials as latent heat thermal energy storage medium. Considering the average hot summer temperature 34–37 °C in Islamabad, Pakistan, Lauric acid and Palmitic acid were selected for preparation of eutectic mixtures possessing a melting temperature range of 33–38 °C. Differential Scanning Calorimetry was performed to determine thermophysical properties of pristine material and prepared eutectic mixtures such as melting-solidification characteristics and latent heat. Thermogravimetric analysis was also performed to determine the thermal stability of the studied phase change materials. Two separate test compartments were designed and developed to analyse the reduction in temperature and respective thermal load. One test compartment comprised of PCM-incorporated clay bricks, while the other with clay brick were made and investigated under direct sunlight and in controlled conditions, respectively. Considering the charging and discharging of PCM, both heating and cooling temperature profiles of individual bricks and compartments were examined by incorporating multiple k-type thermocouples. Structural strength and compressive strength analysis of modified brick was also conducted. A decrease of 4–5.5 °C in the inside temperature of the compartment, ∼32 % reduction in thermal amplitude inside PCM compartment, decrement factor of 0.91 for PCM incorporated brick and a maximum time lag of 150 min was observed. The overall reduction in heat flux inside PCM incorporated bricks compartment was ∼25–30 %.

Computational and experimental analysis of PCM-infused brick for sustainable heat regulation

Numerical simulation and thermal performance of hybrid brick walls embedding a phase change material for passive building applications

Building brick thermal analysis containing a new bio-based phase change material

Study on Phase Change Material in Grooved Bricks for Energy Efficiency of the Buildings

Experimental investigation of eutectic PCM incorporated clay brick for thermal management of building envelope

Seasonal and annual performance analysis of PCM-integrated building brick under the climatic conditions of Marmara region

Experimental analysis of clay bricks incorporated with phase change material for enhanced thermal energy storage in buildings

Impact of phase change materials and brick thickness on thermal comfort in free-floating mode

Thermal behavior analysis of hollow bricks filled with phase-change material (PCM)

Energy savings potential by integrating Phase Change Material into hollow bricks: The case of Moroccan buildings

Sun-baked eco bricks: Boosting energy efficiency with natural composite phase change material capsules

Improving building thermal comfort through passive design – An experimental analysis of phase change material 3D printed concrete

Thermal performance of a building envelope including microencapsulated phase change materials (PCMs): A multiscale experimental and numerical investigation

Innovative passive techniques and PCM integration in building envelopes for enhanced energy efficiency in desert regions

Experimental assessment of concrete masonry units integrated with insulation and phase change material: A wall-pattern study

Use of sustainable Phase Change Material (PCM) in mortars for building energy efficiency

Numerical Study on the Effect of Incorporating Phase Change Materials in a Wall

The thermal performances of cement-based materials with different types of microencapsulated phase change materials

Experimental research on the use of phase change materials in perforated brick rooms for cooling storage

Utilization of Form-Stable Paraffin/Nano-Silica Phase Change Materials for Thermal Energy Storage Enhancement in Mortar

Experimental investigation of heat transfer in bio-based building block with microencapsulated PCM