Abstract:Global warming is mainly triggered by the consumption of fossil fuels and the phenomenon has shaken the global community in the form of climate change resulting in frequent heat waves leading to drought and catastrophic wildfires. At present increase in global average temperature is further increasing energy demands for maintaining thermal comfort inside the building envelope. In such circumstances building materials with improved thermal performance can reduce thermal load inside the building envelope. The study aimed to improve the thermal performance of clay brick, which is a key building material, by incorporating organic eutectic phase change materials as latent heat thermal energy storage medium. Considering the average hot summer temperature 34–37 °C in Islamabad, Pakistan, Lauric acid and Palmitic acid were selected for preparation of eutectic mixtures possessing a melting temperature range of 33–38 °C. Differential Scanning Calorimetry was performed to determine thermophysical properties of pristine material and prepared eutectic mixtures such as melting-solidification characteristics and latent heat. Thermogravimetric analysis was also performed to determine the thermal stability of the studied phase change materials. Two separate test compartments were designed and developed to analyse the reduction in temperature and respective thermal load. One test compartment comprised of PCM-incorporated clay bricks, while the other with clay brick were made and investigated under direct sunlight and in controlled conditions, respectively. Considering the charging and discharging of PCM, both heating and cooling temperature profiles of individual bricks and compartments were examined by incorporating multiple k-type thermocouples. Structural strength and compressive strength analysis of modified brick was also conducted. A decrease of 4–5.5 °C in the inside temperature of the compartment, ∼32 % reduction in thermal amplitude inside PCM compartment, decrement factor of 0.91 for PCM incorporated brick and a maximum time lag of 150 min was observed. The overall reduction in heat flux inside PCM incorporated bricks compartment was ∼25–30 %.

Experimental investigation of eutectic PCM incorporated clay brick for thermal management of building envelope

Experimental analysis of clay bricks incorporated with phase change material for enhanced thermal energy storage in buildings

Computational and experimental analysis of PCM-infused brick for sustainable heat regulation

Thermal Conductivity of Aerated Concrete (AC) Composites Containing Micro-Encapsulated Phase Change Materials

Study on Phase Change Material in Grooved Bricks for Energy Efficiency of the Buildings

Seasonal and annual performance analysis of PCM-integrated building brick under the climatic conditions of Marmara region

Numerical simulation and thermal performance of hybrid brick walls embedding a phase change material for passive building applications

Thermal Performance Assessment of Concrete Walls Using Different Phase Change Materials

Thermal behavior analysis of hollow bricks filled with phase-change material (PCM)

Building brick thermal analysis containing a new bio-based phase change material

Heat transfer reduction in buildings by embedding phase change material in multi-layer walls: Effects of repositioning, thermophysical properties and thickness of PCM

Enhancing thermal comfort in buildings through the integration of phase change material on the building envelope: a simulation study

Effect of phase change material integration in clay hollow brick composite in building envelope for thermal management of energy efficient buildings

Experimental research on the use of phase change materials in perforated brick rooms for cooling storage

A Study on a Novel Phase Change Material Panel Based on Tetradecanol/Lauric Acid/Expanded Perlite/Aluminium Powder for Building Heat Storage

Impact of phase change materials and brick thickness on thermal comfort in free-floating mode

Experimental investigation of heat transfer in bio-based building block with microencapsulated PCM

Innovative passive techniques and PCM integration in building envelopes for enhanced energy efficiency in desert regions

Exploring the Potential of Phase Change Material for Thermal Energy Storage in Building Envelopes

Sun-baked eco bricks: Boosting energy efficiency with natural composite phase change material capsules

Thermal performance of a building envelope including microencapsulated phase change materials (PCMs): A multiscale experimental and numerical investigation