Abstract:Building Services Engineering Research and Technology, Ahead of Print. Phase change radiant panels (PCRPs) with thermal storage can enhance the heat capacity of buildings, and reduce building energy consumption. In this paper, a composite phase change material (CPCM) was prepared by paraffin wax-lauric acid/expanded graphite (PW-LA/EG) and applied to radiant panels. This CPCM exhibits a broad temperature range for phase change (10°C - 40°C), with EG at the optimal mass fraction of 14% and PW-LA at the optimal ratio of 1:1. It has a moderate latent heat capacity, a thermal conductivity of 1.692 W/mK, and excellent thermal stability. Furthermore, the simulations were performed in this paper, and the year-round comfort, thermal storage/release characteristics, and the influencing factors of PCRPs were evaluated by TRNSYS software. The results show that the PCRP can enhance indoor comfort throughout the year and exhibit excellent thermal storage and release properties. The analysis of influencing factors indicates that the thickness of the PCM has a small impact on the PCRP. It is recommended that a radiant panel coverage rate of at least 70% and a water supply time of 10 h in summer and 8 h in winter. These optimized parameter values can offer valuable guidance for the design and practical application of PCRPs.Practical applicationPhase change materials have been widely studied as materials used for thermal energy storage. The radiant panel with phase change materials can enhance the heat capacity of buildings, and reduce building energy consumption. This paper proposes a phase change radiant panel that can be used to solve the problem of year-round energy storage of radiant panels in hot summer and cold winter areas. Furthermore, this paper uses TRNSYS software to study the performance of the phase change radiant panels and offers valuable guidance for the design and practical application of PCM radiant panels.

Experimental research on the use of phase change materials in perforated brick rooms for cooling storage

Adjustable Insulation for Enhancing the Performance of Phase Change Materials in Buildings

Simulative optimization on energy saving performance of phase change panels with different phase transition temperatures

A Study on a Novel Phase Change Material Panel Based on Tetradecanol/Lauric Acid/Expanded Perlite/Aluminium Powder for Building Heat Storage

Experimental study on the performance of a novel RC-PCM-wall

Experimental study of the thermal and energy conservation characteristics of combined phase change material (PCM) room in summer

Exploring the Potential of Phase Change Material for Thermal Energy Storage in Building Envelopes

Parametric Analysis of the Phase Change Material Wall Combining with Micro-Channel Heat Pipe and Sky Radiative Cooling Technology

Enhancing thermal comfort in buildings through the integration of phase change material on the building envelope: a simulation study

Performance analysis of a novel phase-change wall of wood structure coupled with sky-radiation cooling

Experimental and Numerical Performance Analysis of an Active Cooling Wall Module Equipped with Micro-encapsulated Phase Change Material

Preparation and performance study of a novel radiant panel for thermal and cooling storage with phase change materials

Thermal performance and economy of PCM foamed cement walls for buildings in different climate zones

Experimental study on the thermal performance of PCM-based panels developed for exterior finishes of building walls

Experimental Research on Thermal Performance of Shape-Stabilized Phase Change Material Floor

A parametric study on the thermal response of a building wall with a phase change material (PCM) layer for passive space cooling

Experimental Study on the Demand Shifting Effects of PCM Integrated Air-Conditioning Duct

Energy saving performance optimization and regional adaptability of prefabricated buildings with PCM in different climates

Integrating phase change material in building envelopes combined with the earth-to-air heat exchanger for indoor thermal environment regulation

Thermal behavior analysis of hollow bricks filled with phase-change material (PCM)

Study on Phase Change Material in Grooved Bricks for Energy Efficiency of the Buildings