Abstract:Phase change materials (PCMs) exploit their cyclic phase change (solidification and melting) to enable latent heat storage. While incorporating them in thermally activated building systems can potentially enhance energy savings and thermal comfort, they can introduce significant challenges to the building energy management system. This work first reports the result of small-scale side-by-side experiments on two thermally active cuboids with and without BioPCMs at different supply water and PCM melting temperatures, as well as irradiance levels. Next, a dynamic model is developed in TRNSYS v18.05 for a typical design of an office space under hot desert climate conditions. The model is then integrated into a multi-objective optimization routine using NSGA-II algorithms to identify the optimal characteristic cooling curves, melting temperatures, and PCM thicknesses that simultaneously minimize energy consumption and maximize the percentage of comfortable hours. The experimental observations of the PCM-integrated cuboid highlighted energy savings between 80.45 and 84.56 %, compared to the reference cuboid, at nearly the same levels of indoor temperatures. The PCM panels reduced the cooling capacity of the radiant floor but also dampened air temperature variations by up to 83.17 %. Besides, higher solar irradiance levels, encountered in desert areas, were found to enhance the cooling capacity by up to 46.8 %. The Pareto solutions highlighted the possibility of achieving acceptable unmet hours of 3.16 % using PCMs and without the need for an assisting air system, compared to 14.1 % without PCMs. Besides, at the same unmet hours of the reference system, the PCMs reduced the total energy consumption and the peak cooling power by 9.75 and 41.2 %, which translates into substantial operation and capital investments, respectively. Moreover, the study demonstrated by example the importance of calibrating the commonly used cooling curves of thermally active buildings when planning for PCM integration.

Simulative optimization on energy saving performance of phase change panels with different phase transition temperatures

Adjustable Insulation for Enhancing the Performance of Phase Change Materials in Buildings

Numerical Simulation on the Thermal Performance of a PCM-containing Ventilation System with a Continuous Change in Inlet Air Temperature

Numerical analysis on the energy performance of the PCMs-integrated thermochromic coating building envelopes

Study on the Influence of the Application of Phase Change Material on Residential Energy Consumption in Cold Regions of China

Experimental research on the use of phase change materials in perforated brick rooms for cooling storage

Experimental study of the thermal and energy conservation characteristics of combined phase change material (PCM) room in summer

The performance evaluation of shape-stabilized phase change materials in building applications using energy saving index

Optimizing the characteristic cooling curves of PCM-integrated thermally active buildings: Experimental and numerical investigations

Analytical Optimization of Interior PCM for Energy Storage in a Lightweight Passive Solar Room

Preparation and performance study of a novel radiant panel for thermal and cooling storage with phase change materials

Experimental Investigation and Numerical Validation on the Energy-Saving Performance of A Passive Phase Change Material Floor for A Real Scale Building

Study of phase change material on alleviating building overheating risk in cold regions of China

Exploring the Potential of Phase Change Material for Thermal Energy Storage in Building Envelopes

Experimental and numerical study on performance enhancement of photovoltaic panel by controlling temperature with phase change material

A Study on a Novel Phase Change Material Panel Based on Tetradecanol/Lauric Acid/Expanded Perlite/Aluminium Powder for Building Heat Storage

Improving thermal performance of a passive ventilation and cooling system by integrating a phase-change material: Dynamic characteristics and parametric examinations

A New Method to Estimate Optimal Phase Change Material Characteristics in A Passive Solar Room

Integrating phase change material in building envelopes combined with the earth-to-air heat exchanger for indoor thermal environment regulation

Simulation-based optimization of PCM melting temperature to improve the energy performance in buildings

Experimental and Numerical Performance Analysis of an Active Cooling Wall Module Equipped with Micro-encapsulated Phase Change Material