Abstract:As the impact of climate change intensifies, meeting the energy demand of buildings in China's cold regions is becoming increasingly challenging, particularly in terms of cooling energy consumption. The effectiveness of integrating phase change material (PCM) into building envelopes for energy saving in China's cold regions is unclear. The aim of this study is to assess the effectiveness of PCM integration in building enclosures for energy efficiency in these regions. The research monitored and recorded indoor temperature data from typical residential cases from May to September. This measured data was then used to validate the accuracy of EnergyPlus22-1 software simulation models. Subsequently, the calibrated model was utilized to conduct a comparative analysis on the effects of PCM on indoor temperatures and cooling energy consumption across these regions. The results of these comparative analyses indicated that PCM can alleviate indoor overheating to varying degrees in severe cold regions of China. Focusing on north-facing bedrooms, applying PCMs reduced the duration of overheating in non-air-conditioned buildings in severe cold regions of China by 136 h (Yichun), 340 h (Harbin), 356 h (Shenyang), and 153 h (Dalian). In terms of cooling energy consumption, the energy saved by applying PCMs ranged from 1.48 to 13.83 kWh/m2. These results emphasize that the performance of PCM varies with climate change, with the most significant energy-saving effects observed in severe cold regions. In north-facing bedrooms in Harbin, the energy-saving rate was as high as 60.30%. Based on these results, the study offers guidance and recommendations for feasible passive energy-saving strategies for buildings in severe cold and cold regions of China in the face of climate change. Additionally, it provides practical guidance for applying PCMs in different climatic zones in China.

Experimental Investigation and Numerical Validation on the Energy-Saving Performance of A Passive Phase Change Material Floor for A Real Scale Building

Adjustable Insulation for Enhancing the Performance of Phase Change Materials in Buildings

Simulative optimization on energy saving performance of phase change panels with different phase transition temperatures

Experimental Research on Thermal Performance of Shape-Stabilized Phase Change Material Floor

Experimental Study on the Thermal Performance of the Shape-Stabilized Phase Change Material Floor Used in Passive Solar Buildings

The performance evaluation of shape-stabilized phase change materials in building applications using energy saving index

Modeling and simulation on the thermal performance of shape-stabilized phase change material floor used in passive solar buildings

Energy management of residential buildings using innovative passive techniques

Experiment verification and simulation optimization of phase change material cool roof in summer -- A case study of Chongqing, China

Model and simulation on thermal performance of shape-stabilized phase change material floor

Study on the Influence of the Application of Phase Change Material on Residential Energy Consumption in Cold Regions of China

Experimental Study on Phase Change Material with Solar Heater System for Building Heating

Experimental Investigation and Numerical Modeling of Room Temperature Control in Buildings by the Implementation of Phase Change Material in the Roof

Experimental research on the use of phase change materials in perforated brick rooms for cooling storage

Experimental study of the thermal and energy conservation characteristics of combined phase change material (PCM) room in summer

Performance analysis of a novel phase-change wall of wood structure coupled with sky-radiation cooling

Exploring the Potential of Phase Change Material for Thermal Energy Storage in Building Envelopes

Numerical analysis on the energy performance of the PCMs-integrated thermochromic coating building envelopes

Experimental and Numerical Investigation of Composite Phase Change Materials for Building Energy Saving

Energy saving performance optimization and regional adaptability of prefabricated buildings with PCM in different climates

Study of phase change material on alleviating building overheating risk in cold regions of China