Abstract:Shape-stabilized phase change material (PCM) is a kind of novel PCM. It has the following salient features: large apparent specific heat for phase change temperature region, suitable thermal conductivity, keeping shape stabilized in the phase change process and no need for containers. The preparation for such kind material was investigated and its thermophysical properties were measured. Some applications of such material in energy efficient buildings (e.g., in electric under floor space heating system, in wallboard or floor to absorb solar energy to narrow the temperature swing of a day in winter) were studied. Some models of analyzing the thermal performance of the systems were developed, which were validated with the experiments. The following conclusions are obtained: (1) the applications of the novel PCM we put forward are of promising perspectives in some climate regions; (2) by using different paraffin, the melting temperature of shape-stabilized PCM can be adjusted; (3) the heat of fusion of it is in the range of 62–138kJkg−1; (4) for PCM floor or wallboard to absorb solar energy to narrow the temperature swing in a day in winter, the suitable melting temperature of PCM should be a little higher than average indoor air temperature of the room without PCM for the period of sunshine; (5) for the electric under-floor space heating system, the optimal melting temperature can be determined by simulation; (6) PCM layer used in the aforementioned application should not be thicker than 2cm; (7) the models developed by us are helpful for applications of shape-stabilized PCM in buildings.

Model and simulation on thermal performance of shape-stabilized phase change material floor

Modeling and simulation on the thermal performance of shape-stabilized phase change material floor used in passive solar buildings

Experimental Study on the Thermal Performance of the Shape-Stabilized Phase Change Material Floor Used in Passive Solar Buildings

Preparation, Thermal Performance, and Application of Shape-stabilized PCM in Energy Efficient Buildings

Experimental Research on Thermal Performance of Shape-Stabilized Phase Change Material Floor

Adjustable Insulation for Enhancing the Performance of Phase Change Materials in Buildings

Experimental Study of Under-Floor Electric Heating System with Shape-Stabilized PCM Plates

Thermal Performance of a Shape-Stabilized Phase Change Material Floor with Different Heating Positions

Research on the thermal performance of the room with integrated water tube floor heating system using shape-stabilized phase change materials for energy storage

The performance evaluation of shape-stabilized phase change materials in building applications using energy saving index

Numerical study of thermal performance of phase change material energy storage floor in solar water heating system

Experimental Study of Underfloor Air Supply System with Air Solar Collector and Shape-Stabilized PCM

Thermal performance of phase change material energy storage floor for active solar water-heating system

An Assessment of Mixed Type PCM-gypsum and Shape-Stabilized PCM Plates in a Building for Passive Solar Heating

Preparation and Application of Paraffin/Expanded Graphite-Based Phase Change Material Floor for Solar-Heat Pump Combined Radiant Heating Systems

THE EXPERIMENTAL VERIFICATION OF THE MODEL OF RADIANT FLOOR HEATING SYSTEM WITH FORM-STABLE PCM AS THE THERMAL MASS AND THE PARAMETER ANALYSIS

Thermal Analysis of a Double Layer Phase Change Material Floor

Design and analysis of phase change material based floor heating system for thermal energy storage

NUMERICAL SIMULATION ON THE RADIANT FLOOR HEATING SYSTEM UTILIZING FORM-STABLE PCM AS THE THERMAL MASS

Thermal Performance Evaluation and Optimal Design of Building Roof with Outer-Layer Shape-Stabilized PCM

Study of an Electrical Heating System with Ductless Air Supply and Shape-Stabilized PCM for Thermal Storage