Abstract:Shape-stabilized phase change material (PCM) is a kind of novel PCM. It has the following salient features: large apparent specific heat for phase change temperature region, suitable thermal conductivity, keeping shape stabilized in the phase change process and no need for containers. The preparation for such kind material was investigated and its thermophysical properties were measured. Some applications of such material in energy efficient buildings (e.g., in electric under floor space heating system, in wallboard or floor to absorb solar energy to narrow the temperature swing of a day in winter) were studied. Some models of analyzing the thermal performance of the systems were developed, which were validated with the experiments. The following conclusions are obtained: (1) the applications of the novel PCM we put forward are of promising perspectives in some climate regions; (2) by using different paraffin, the melting temperature of shape-stabilized PCM can be adjusted; (3) the heat of fusion of it is in the range of 62–138kJkg−1; (4) for PCM floor or wallboard to absorb solar energy to narrow the temperature swing in a day in winter, the suitable melting temperature of PCM should be a little higher than average indoor air temperature of the room without PCM for the period of sunshine; (5) for the electric under-floor space heating system, the optimal melting temperature can be determined by simulation; (6) PCM layer used in the aforementioned application should not be thicker than 2cm; (7) the models developed by us are helpful for applications of shape-stabilized PCM in buildings.

Experimental Research on Thermal Performance of Shape-Stabilized Phase Change Material Floor

Experimental Study on the Thermal Performance of the Shape-Stabilized Phase Change Material Floor Used in Passive Solar Buildings

Model and simulation on thermal performance of shape-stabilized phase change material floor

Modeling and simulation on the thermal performance of shape-stabilized phase change material floor used in passive solar buildings

Adjustable Insulation for Enhancing the Performance of Phase Change Materials in Buildings

Preparation, Thermal Performance, and Application of Shape-stabilized PCM in Energy Efficient Buildings

The performance evaluation of shape-stabilized phase change materials in building applications using energy saving index

Experimental Study of Under-Floor Electric Heating System with Shape-Stabilized PCM Plates

Experimental Investigation and Numerical Validation on the Energy-Saving Performance of A Passive Phase Change Material Floor for A Real Scale Building

Design and analysis of phase change material based floor heating system for thermal energy storage

Research on the thermal performance of the room with integrated water tube floor heating system using shape-stabilized phase change materials for energy storage

EXPERIMENTAL STUDY OF UNDERFLOOR ELECTRIC HEATING SYSTEM WITH LATENT THERMAL STORAGE A AIR SUPPLY

Experimental research on the use of phase change materials in perforated brick rooms for cooling storage

Experimental Study of Underfloor Air Supply System with Air Solar Collector and Shape-Stabilized PCM

Thermal Analysis of a Direct-Gain Room with Shape-Stabilized PCM Plates

An Assessment of Mixed Type PCM-gypsum and Shape-Stabilized PCM Plates in a Building for Passive Solar Heating

Study of an Electrical Heating System with Ductless Air Supply and Shape-Stabilized PCM for Thermal Storage

Thermal performance and economy of PCM foamed cement walls for buildings in different climate zones

Experimental Investigation and Numerical Modeling of Room Temperature Control in Buildings by the Implementation of Phase Change Material in the Roof

Experimental Study on Phase Change Material with Solar Heater System for Building Heating

Experimental study of the thermal and energy conservation characteristics of combined phase change material (PCM) room in summer