Abstract:This paper firstly proposed and investigated a single-stage air source heat pump (ASHP) system combined with a novel phase change material (PCM) based storage device, also named as condensing heat storage, to solve the problems of poor heating performance of ASHP system under extreme conditions in cold regions. A mathematical model of the novel system was established and validated to comprehensively investigate the operating characteristics under initial conditions. The simulation results suggested that the PCM temperature in two-phase zone of condensing heat storage should not exceed its phase change end temperature during the charging process under initial conditions by controlling the charging time, in order to avoid damage to the system. The proposed system could achieve its steady state under initial conditions after operating time for 6 days. In addition, the results showed that the heat storage capacity of condensing heat storage was able to reach 100.59 kWh and the average heat storage rate was 7.19 kW during the charging process under steady state. The heat storage capacity was sufficient to be provided for a 164 m(2) room for 10 h theoretically with an average heat release rate of 10.06 kW, which achieved all-day continuous heat supply by the proposed system. Besides, the model was adopted to analyze the effects of some structural parameters of condensing heat storage on system heat storage performance. The system performed well in smaller fin pitch and smaller tube pitch, since both heat storage capacity and supply water temperature were increased under these circumstances.

EXPERIMENTAL STUDY OF UNDERFLOOR ELECTRIC HEATING SYSTEM WITH LATENT THERMAL STORAGE A AIR SUPPLY

Experimental Study of Under-Floor Electric Heating System with Shape-Stabilized PCM Plates

Study of an Electrical Heating System with Ductless Air Supply and Shape-Stabilized PCM for Thermal Storage

MODELING AND SIMULATION OF UNDERFLOOR ELECTRIC HEATING SYSTEM WITH LATENT THERMAL STORAGE AND AIR SUPPLY

Experimental Study of Underfloor Air Supply System with Air Solar Collector and Shape-Stabilized PCM

The Performance of Under-floor Electric Heating System with Latent Thermal Storage

Experimental Study on the Thermal Performance of the Shape-Stabilized Phase Change Material Floor Used in Passive Solar Buildings

SIMULATION OF THERMAL PERFORMANCE OF UNDER-FLOOR ELECTRIC HEATING SYSTEM WITH LATENT HEAT THERMAL ENERGY STORAGE PLATE

Experimental Research on Thermal Performance of Shape-Stabilized Phase Change Material Floor

Research on the thermal performance of the room with integrated water tube floor heating system using shape-stabilized phase change materials for energy storage

Experimental study on phase change heat storage floor coupled with air source heat pump heating system in a classroom

Thermal performance of phase change material energy storage floor for active solar water-heating system

Numerical study of thermal performance of phase change material energy storage floor in solar water heating system

Experimental Study on Phase Change Material with Solar Heater System for Building Heating

Preparation and Application of Paraffin/Expanded Graphite-Based Phase Change Material Floor for Solar-Heat Pump Combined Radiant Heating Systems

Experimental study on heating characteristics and control strategies of ground source heat pump and radiant floor heating system in an office building

Modeling and simulation on the thermal performance of shape-stabilized phase change material floor used in passive solar buildings

Experimental Study on a Novel Flat-Heat-pipe Heating System Integrated with Phase Change Material and Thermoelectric Unit

Model and simulation on thermal performance of shape-stabilized phase change material floor

Thermal performance of a radiant floor heating system with different heat storage materials and heating pipes

Performance Study of Phase Change Charging/discharging Processes of Condensing Heat Storage in Cold Regions Based on a Mathematical Model