Abstract:Phase change materials (PCMs) exploit their cyclic phase change (solidification and melting) to enable latent heat storage. While incorporating them in thermally activated building systems can potentially enhance energy savings and thermal comfort, they can introduce significant challenges to the building energy management system. This work first reports the result of small-scale side-by-side experiments on two thermally active cuboids with and without BioPCMs at different supply water and PCM melting temperatures, as well as irradiance levels. Next, a dynamic model is developed in TRNSYS v18.05 for a typical design of an office space under hot desert climate conditions. The model is then integrated into a multi-objective optimization routine using NSGA-II algorithms to identify the optimal characteristic cooling curves, melting temperatures, and PCM thicknesses that simultaneously minimize energy consumption and maximize the percentage of comfortable hours. The experimental observations of the PCM-integrated cuboid highlighted energy savings between 80.45 and 84.56 %, compared to the reference cuboid, at nearly the same levels of indoor temperatures. The PCM panels reduced the cooling capacity of the radiant floor but also dampened air temperature variations by up to 83.17 %. Besides, higher solar irradiance levels, encountered in desert areas, were found to enhance the cooling capacity by up to 46.8 %. The Pareto solutions highlighted the possibility of achieving acceptable unmet hours of 3.16 % using PCMs and without the need for an assisting air system, compared to 14.1 % without PCMs. Besides, at the same unmet hours of the reference system, the PCMs reduced the total energy consumption and the peak cooling power by 9.75 and 41.2 %, which translates into substantial operation and capital investments, respectively. Moreover, the study demonstrated by example the importance of calibrating the commonly used cooling curves of thermally active buildings when planning for PCM integration.

Energy management of residential buildings using innovative passive techniques

Phase Change Materials Integrated Into the Building Envelope to Improve Energy Efficiency and Thermal Comfort

Innovative passive techniques and PCM integration in building envelopes for enhanced energy efficiency in desert regions

Phase change with inner ventilation for energy management: Roofs buildings in hot & dry climates case

Optimizing the characteristic cooling curves of PCM-integrated thermally active buildings: Experimental and numerical investigations

Advancing sustainable building through passive cooling with phase change materials, a comprehensive literature review

Experimental Investigation and Numerical Validation on the Energy-Saving Performance of A Passive Phase Change Material Floor for A Real Scale Building

Phase change material thermal energy storage systems for cooling applications in buildings: A review

Experimental Investigation and Numerical Modeling of Room Temperature Control in Buildings by the Implementation of Phase Change Material in the Roof

A novel hybrid optimization and machine learning technique to energy storage in smart buildings using phase change materials

Enhancing Energy Efficiency in Buildings through PCM Integration: A Study across Different Climatic Regions

Exploring the Potential of Phase Change Material for Thermal Energy Storage in Building Envelopes

A comparative evaluation on energy consumption of a building using bio-based and paraffin-based phase change materials integrated to external building envelope

Thermal Analysis of Building Roofs with Latent Heat Storage for Reduction in Energy Consumption and CO2 Emissions: An Experimental and Numerical Research

Enhancing thermal comfort in buildings through the integration of phase change material on the building envelope: a simulation study

Energy Conservation of Residential Buildings in Extreme Climates with Phase Change Material-Aluminum Radiation Reflector Cool Roof

Influence of coupling air conditioner with hybrid PCMs on building interior conditions and consumed power: Experimental investigation

A new approach for selecting and implementing phase change materials in Kuwaiti Buildings: Practical considerations

The Impact of Integrating Phase Change Material Upon Indoor Air Temperature in Hot Climates

Experimental and Numerical Performance Analysis of an Active Cooling Wall Module Equipped with Micro-encapsulated Phase Change Material

Thermal performance and energy saving using phase change materials (PCM) integrated in building walls