Abstract:Phase change materials (PCMs) exploit their cyclic phase change (solidification and melting) to enable latent heat storage. While incorporating them in thermally activated building systems can potentially enhance energy savings and thermal comfort, they can introduce significant challenges to the building energy management system. This work first reports the result of small-scale side-by-side experiments on two thermally active cuboids with and without BioPCMs at different supply water and PCM melting temperatures, as well as irradiance levels. Next, a dynamic model is developed in TRNSYS v18.05 for a typical design of an office space under hot desert climate conditions. The model is then integrated into a multi-objective optimization routine using NSGA-II algorithms to identify the optimal characteristic cooling curves, melting temperatures, and PCM thicknesses that simultaneously minimize energy consumption and maximize the percentage of comfortable hours. The experimental observations of the PCM-integrated cuboid highlighted energy savings between 80.45 and 84.56 %, compared to the reference cuboid, at nearly the same levels of indoor temperatures. The PCM panels reduced the cooling capacity of the radiant floor but also dampened air temperature variations by up to 83.17 %. Besides, higher solar irradiance levels, encountered in desert areas, were found to enhance the cooling capacity by up to 46.8 %. The Pareto solutions highlighted the possibility of achieving acceptable unmet hours of 3.16 % using PCMs and without the need for an assisting air system, compared to 14.1 % without PCMs. Besides, at the same unmet hours of the reference system, the PCMs reduced the total energy consumption and the peak cooling power by 9.75 and 41.2 %, which translates into substantial operation and capital investments, respectively. Moreover, the study demonstrated by example the importance of calibrating the commonly used cooling curves of thermally active buildings when planning for PCM integration.

The Impact of Integrating Phase Change Material Upon Indoor Air Temperature in Hot Climates

Phase Change Materials Integrated Into the Building Envelope to Improve Energy Efficiency and Thermal Comfort

Thermal performance and energy saving using phase change materials (PCM) integrated in building walls

Exploring the Potential of Phase Change Material for Thermal Energy Storage in Building Envelopes

Enhancing Energy Efficiency in Buildings through PCM Integration: A Study across Different Climatic Regions

Enhancing thermal comfort in buildings through the integration of phase change material on the building envelope: a simulation study

A new approach for selecting and implementing phase change materials in Kuwaiti Buildings: Practical considerations

Dynamic integration of phase change material in walls for enhancing building thermal performance—A novel self-adaptive method for moving PCM layer

Incorporation of phase change materials into building envelope for thermal comfort and energy saving: A comprehensive analysis

Optimizing PCM Integrated Wall and Roof for Energy Saving in Building under Various Climatic Conditions of Mediterranean Region

Analyzing the impact of using phase change materials on energy consumption in buildings: A case study

Thermal Energy Storage Using Phase Change Materials in Building Applications: A Review of the Recent Development

Phase change with inner ventilation for energy management: Roofs buildings in hot & dry climates case

Competition between insulation and phase change material to intensify the resilience of envelope against heat exchange to reduce overall energy consumption in buildings

Numerical analysis on phase change progress and thermal performance of different roofs integrated with phase change material (PCM) in Moroccan semi-arid and Mediterranean climates

New structure for better thermal resistance of building with phase change material: Response to milder thermal change than common walls

Heat transfer reduction in buildings by embedding phase change material in multi-layer walls: Effects of repositioning, thermophysical properties and thickness of PCM

A comparative evaluation on energy consumption of a building using bio-based and paraffin-based phase change materials integrated to external building envelope

Impact of phase change materials and brick thickness on thermal comfort in free-floating mode

Optimizing the characteristic cooling curves of PCM-integrated thermally active buildings: Experimental and numerical investigations

Application of Phase Change Materials (PCMs) in Building Walls: A Review