Abstract:Abstract According to the report published by the International Energy Agency (IEA), active space cooling and air conditioning systems consume approximately 16% of the building sector’s final electricity consumption and contribute 3.94% of global greenhouse gas emissions. In this regard, the use of low-cost but effective passive solutions, such as organic phase change materials (PCM) on the building envelope, can provide high thermal mass and thus can lower the temperature fluctuation inside the building. In the current study, the potential of PCM-enhanced building envelopes to enhance thermal comfort has been studied. The study has been performed using the conduction finite difference (ConFD) algorithm in EnergyPlus software. A comparative study has been done for a traditional reinforced cement concrete (RCC) reference test room of size (5m x 6m x 3m) and another room of the same size with PCM-enhanced walls for the hot and humid climate zone of Guwahati (latitude 26.1, longitude 91.7), in India. A PCM thickness of 20 mm is used at the external surface of the wall between the red clay burnt brick (120 mm in thickness) and the cement plaster (25mm thick). The PCM used for the study is a biocomposite PCM, named WH-PCM, with a melting point of 31.5°C and thermal conductivity of 0.27 W/mK. The simulation results reveal that the R-value of the external wall of the room with PCM walls has been increased by 84.90% compared to the reference room with the incorporation of WH-PCM, resulting in a mean zone temperature difference of 0.3°C throughout the year. Also, the indoor thermal discomfort hours have been annually reduced by 15.82% with the use of WH-PCM when compared with the reference room. A similar temperature difference trend, which is 1.93°C, is also observed in the single PCM brick experimental result under identical testing conditions as a regular brick of the same size.

Experimental study on the thermal performance of PCM-based panels developed for exterior finishes of building walls

Enhancing thermal comfort in buildings through the integration of phase change material on the building envelope: a simulation study

A Study on a Novel Phase Change Material Panel Based on Tetradecanol/Lauric Acid/Expanded Perlite/Aluminium Powder for Building Heat Storage

Thermal performance and economy of PCM foamed cement walls for buildings in different climate zones

A parametric study on the thermal response of a building wall with a phase change material (PCM) layer for passive space cooling

Dynamic integration of phase change material in walls for enhancing building thermal performance—A novel self-adaptive method for moving PCM layer

Experimental study on the performance of an active novel vertical partition thermal storage wallboard based on composite phase change material with porous silica and microencapsulation

Numerical simulation and thermal performance of hybrid brick walls embedding a phase change material for passive building applications

Experimental and Numerical Performance Analysis of an Active Cooling Wall Module Equipped with Micro-encapsulated Phase Change Material

Experimental research on the use of phase change materials in perforated brick rooms for cooling storage

Experimental study on the performance of a novel RC-PCM-wall

Application of Phase Change Materials (PCMs) in Building Walls: A Review

Thermal performance and energy saving using phase change materials (PCM) integrated in building walls

Heat transfer reduction in buildings by embedding phase change material in multi-layer walls: Effects of repositioning, thermophysical properties and thickness of PCM

Numerical Study on the Effect of Incorporating Phase Change Materials in a Wall

Energy and Thermal Performance Analysis of PCM-Incorporated Glazing Units Combined with Passive and Active Techniques: A Review Study

Development of Concrete Façade Sandwich Panels Incorporating Phase Change Materials

Evaluating the potential of optimized PCM-wallboards for reducing energy consumption and CO 2 emission in buildings

Thermal storage and nonlinear heat-transfer characteristics of PCM wallboard

Experimental and numerical analysis of the energy efficiency of PCM concrete wallboards under different thermal scenarios

Study on optimization of thermal property parameters of phase change wallboard and its application simulation in the building