Abstract:Phase change materials (PCMs) exploit their cyclic phase change (solidification and melting) to enable latent heat storage. While incorporating them in thermally activated building systems can potentially enhance energy savings and thermal comfort, they can introduce significant challenges to the building energy management system. This work first reports the result of small-scale side-by-side experiments on two thermally active cuboids with and without BioPCMs at different supply water and PCM melting temperatures, as well as irradiance levels. Next, a dynamic model is developed in TRNSYS v18.05 for a typical design of an office space under hot desert climate conditions. The model is then integrated into a multi-objective optimization routine using NSGA-II algorithms to identify the optimal characteristic cooling curves, melting temperatures, and PCM thicknesses that simultaneously minimize energy consumption and maximize the percentage of comfortable hours. The experimental observations of the PCM-integrated cuboid highlighted energy savings between 80.45 and 84.56 %, compared to the reference cuboid, at nearly the same levels of indoor temperatures. The PCM panels reduced the cooling capacity of the radiant floor but also dampened air temperature variations by up to 83.17 %. Besides, higher solar irradiance levels, encountered in desert areas, were found to enhance the cooling capacity by up to 46.8 %. The Pareto solutions highlighted the possibility of achieving acceptable unmet hours of 3.16 % using PCMs and without the need for an assisting air system, compared to 14.1 % without PCMs. Besides, at the same unmet hours of the reference system, the PCMs reduced the total energy consumption and the peak cooling power by 9.75 and 41.2 %, which translates into substantial operation and capital investments, respectively. Moreover, the study demonstrated by example the importance of calibrating the commonly used cooling curves of thermally active buildings when planning for PCM integration.

Evaluating the potential of optimized PCM-wallboards for reducing energy consumption and CO 2 emission in buildings

Adjustable Insulation for Enhancing the Performance of Phase Change Materials in Buildings

Optimizing PCM Integrated Wall and Roof for Energy Saving in Building under Various Climatic Conditions of Mediterranean Region

Enhancing Energy Efficiency in Buildings through PCM Integration: A Study across Different Climatic Regions

Enhancing Thermal Performance of Buildings Through Macro-Encapsulated PCM Integration in Wall and Roof

Exploring the Potential of Phase Change Material for Thermal Energy Storage in Building Envelopes

Dynamic integration of phase change material in walls for enhancing building thermal performance—A novel self-adaptive method for moving PCM layer

Thermal performance and economy of PCM foamed cement walls for buildings in different climate zones

Derivation of appropriate temperature change for application of phase change materials in building walls for energy reduction in Korean climatic conditions

Optimizing the characteristic cooling curves of PCM-integrated thermally active buildings: Experimental and numerical investigations

A novel hybrid optimization and machine learning technique to energy storage in smart buildings using phase change materials

Thermoeconomic analysis of a wall incorporating phase change material in a rural residence located in northeast China

Phase change materials to improve the energy savings of wood building envelopes in Quebec

Effect of melting point on thermodynamics of thin PCM reinforced residential frame walls in different climate zones

Enhancing thermal comfort in buildings through the integration of phase change material on the building envelope: a simulation study

A comparative evaluation on energy consumption of a building using bio-based and paraffin-based phase change materials integrated to external building envelope

Application of Phase Change Materials (PCMs) in Building Walls: A Review

Simulation-based optimization of PCM melting temperature to improve the energy performance in buildings

Energy saving performance optimization and regional adaptability of prefabricated buildings with PCM in different climates

Heat transfer reduction in buildings by embedding phase change material in multi-layer walls: Effects of repositioning, thermophysical properties and thickness of PCM

Parametric analysis of influencing factors in Phase Change Material Wallboard (PCMW)