Abstract:Using thermal energy storage such as phase change materials (PCMs) is a suitable solution to reduce energy consumption in order to maintain thermal comfort conditions inside the building. There is a wide range of phase change materials according to their different characteristics such as melting temperature, freezing temperature, latent heat capacity, specific heat value of solid and liquid phase, thermal conductivity coefficient, and charge and discharge range, which makes it difficult to choose the right PCM. In this research, two common groups of phase change materials that are used commercially are studied and after performing a sensitivity analysis on them, a suitable temperature range is selected. Then the selected PCMs are placed in different parts of the external envelopes of the building and various parameters such as air conditioning system energy consumption, thermal comfort, heat balance, etc. are examined. It should be noted that in this study, the use of PCMs in buildings with cooling and heating systems is investigated. In order to carry out the simulation, a two-story office building located in Arak, Iran was modeled in Design Builder software along with all the details. The outputs show that if Bio PCM is used in the outer layer of the wall in the summer season, it is possible to save up to 154 w/m2 in the energy required for cooling the building. While the use of Bio PCM M91 Q21 material in the inner layer of the wall will reduce the load of the cooling system by 246.15 Wh/m2. Also, if RT PCM is used, it is possible to reduce the heat load by 80%. Furthermore, by analyzing the optimal cases, it can be concluded that increasing the thickness of the PCM layer cannot effectively improve the thermal performance of the building. On the contrary, their reduction in some cases leads to a reduction in energy demand in the building. Finally, in order to generalize the results, the optimal situation was compared with two similar climates of Arak city.

Phase change materials to improve the energy savings of wood building envelopes in Quebec

Exploring the Potential of Phase Change Material for Thermal Energy Storage in Building Envelopes

Dynamic integration of phase change material in walls for enhancing building thermal performance—A novel self-adaptive method for moving PCM layer

Evaluating the potential of optimized PCM-wallboards for reducing energy consumption and CO 2 emission in buildings

Enhancing thermal comfort in buildings through the integration of phase change material on the building envelope: a simulation study

Enhancing Energy Efficiency in Buildings through PCM Integration: A Study across Different Climatic Regions

Phase Change Materials Integrated Into the Building Envelope to Improve Energy Efficiency and Thermal Comfort

Incorporation of phase change materials into building envelope for thermal comfort and energy saving: A comprehensive analysis

Phase-Change-Material-Impregnated Wood for Potential Energy-Saving Building Materials

Enhancing Thermal Performance of Buildings Through Macro-Encapsulated PCM Integration in Wall and Roof

Use of phase change materials in wood and wood-based composites for thermal energy storage: A Review

Analyzing the impact of using phase change materials on energy consumption in buildings: A case study

Heat transfer reduction in buildings by embedding phase change material in multi-layer walls: Effects of repositioning, thermophysical properties and thickness of PCM

A comparative evaluation on energy consumption of a building using bio-based and paraffin-based phase change materials integrated to external building envelope

Performance analysis of a novel phase-change wall of wood structure coupled with sky-radiation cooling

Thermoeconomic analysis of a wall incorporating phase change material in a rural residence located in northeast China

Numerical Study on the Effect of Incorporating Phase Change Materials in a Wall

Enhancing Building Energy Efficiency with Innovative Paraffin-Based Phase Change Materials

Numerical simulation and thermal performance of hybrid brick walls embedding a phase change material for passive building applications

Energy saving performance optimization and regional adaptability of prefabricated buildings with PCM in different climates

Numerical analysis of phase change materials/wood–plastic composite roof module system for improving thermal performance