Abstract:The microstructure and micro-hardness distribution of laser additive-manufactured (AM-ed) materials exhibit significant heterogeneity, making it difficult to obtain accurate dynamic plastic constitutive models. This paper proposes a novel approach to derive a heterogeneous constitutive model for the laser AM-ed materials, utilizing nano-indentation tests and orthogonal cutting experiments. Nano-indentation tests were conducted to obtain indentation load-depth curves for various zones within laser AM-ed alloys. Through the energy method and finite element inversion analysis, heterogeneous power-law constitutive models were established. Additionally, orthogonal cutting experiments, combined with Oxley's model, were employed to calculate key parameters such as equivalent shear strain, shear strain rate, shear stress, and temperature in the primary deformation zone. These parameters, when integrated with the power-law models, facilitated the development of Johnson-Cook constitutive models specifically tailored for the AM-ed materials. The findings demonstrate that these constitutive model accurately capture the heterogeneous nature of AM-ed materials and effectively characterizes their dynamic mechanical behavior under conditions of large strain (up to 5), high strain rate (up to 10 5 s -1 ), and high temperature (up to 850 °C). Furthermore, finite element simulations of cutting force and chip morphology in different zones of AM-ed materials exhibits excellent agreement with experimental results. The maximum prediction errors for main cutting force and feeding force are 10.87% and 12.71%, highlighting the precision of the developed Johnson-Cook constitutive model. In addition, the heterogeneous characteristics have a significant impact on the machinability, and the research results can provide help for machining mechanism and process optimization of laser AM-ed materials.

Investigation into thermodynamic behavior of LA103Z Mg Li alloy during turning based on modified Johnson–Cook model

Constitutive Model of Aviation Aluminum-Alloy Material in Metal Machining

Experimental Studies of Cutting Temperature During High-Speed Milling of Aerospace Aluminum

Simulation of High-Speed Milling Process of Aerospace Aluminum Alloy

A Modified Johnson–Cook Constitutive Model and Its Application to High Speed Machining of 7050-T7451 Aluminum Alloy

The Role of Material Model in the Finite Element Simulation of High-Speed Machining of Ti6Al4V

0610 A Comparative Study on Gao-Zhang and Johnson-Cook Constitutive Models

Modification of strain rate strengthening coefficient for Johnson-Cook constitutive model of Ti6Al4V alloy

Optimization of Milling Aluminum Alloy 6061-T6 using Modified Johnson-Cook Model

Application of Four Different Models for Predicting the High-Temperature Flow Behavior of 1420 Al–Li Alloy

Research on Johnson–Cook Constitutive Model of γ-TiAl Alloy with Improved Parameters

Mechanical behavior and semiempirical force model of aerospace aluminum alloy milling using nano biological lubricant

Modification of the Johnson-Cook relationship for AZ31 magnesium alloy at high strain rates

Determination and Verification of the Johnson–Cook Constitutive Model Parameters in the Precision Machining of Ti6Al4V Alloy

Identification of Heterogeneous Constitutive Model of Laser Additive Manufactured Materials based on Nano-indentation Test and Orthogonal Metal Cutting

A Modified Johnson–Cook Constitutive Model for Characterizing the Hardening Behavior of Typical Magnesium Alloys under Tension at Different Strain Rates: Experiment and Simulation

An improved material constitutive model for simulation of high-speed cutting of 6061-T6 aluminum alloy with high accuracy

Numerical modeling and experimental assessment of dynamic behavior of aluminum alloy 7075-T6 in machining process

Effects of Friction Stir Processing on the Microstructure and Mechanical Properties of an Ultralight Mg-Li Alloy

A modified Johnson-Cook model considering strain softening of A356 alloy

A Modified Constitutive Model and Microstructure Characterization for 2195 Al-Li Alloy Hot Extrusion