Abstract:This research characterizes the dynamic hardening behavior of an aluminum alloy sheet of 5182-O for the coupling effect of strain rate and temperature. Tests are carried out for dogbone specimens at different loading conditions to experimentally characterize the strain rate hardening and thermal softening effect for the alloy. The behaviours are then modeled by the Johnson-Cook, Zerilli-Armstrong and Lim-Huh models. In addition, the FEA-friendly polynomial model and artificial neural network (ANN) model are used to describe the highly non-linearity and coupling of strain hardening. Factors affecting ANN predicting accuracy and numerical computing efficiency are comprehensively studied including network structure, parameter settings and optimization algorithms. All the analytical and ANN models are also implemented into ABAQUS/Explicit to numerically compute the reaction force of tensile tests of dogbone specimens. The strain hardening curves are predicted by the analytical and ANN models for the comparison with experimental measurements to evaluate their performance. The experimental results show that the strain rate is slightly negative at room temperature, while the strain rate effect turns to be positive as temperature rises. The comparison of the flow curves between prediction and experiments reveals that the coupling effect is reasonably illustrated by the proposed polynomial model and the ANN model illustrates the flow curves with the dramatically much better accuracy than all the other models. The numerically predicted reaction forces prove that the ANN model accurately illustrates the load capability with the best agreement among the models studied in this research. The numerical computation also shows that the numerical computation efficiency of the ANN model is slightly reduced compared with analytical models, but the reduction is not much and worthwhile compared with the high accuracy of ANN.

A modified Johnson-Cook model considering strain softening of A356 alloy

An Enhanced Johnson–Cook Model for Hot Compressed A356 Aluminum Alloy

Study on constitutive relationship of 6061 aluminum alloy based on Johnson-Cook model

Modification of the Johnson-Cook relationship for AZ31 magnesium alloy at high strain rates

A Modified Johnson–Cook Model and Microstructure Evolution of As-Extruded AA 2055 Alloy during Isothermal Compression

A modified Johnson–Cook model for 2A12 aluminum alloys

Modelling Dynamic Recrystallization of A356 Aluminum Alloy during Hot Deformation

A Modified Johnson–Cook Constitutive Model and Its Application to High Speed Machining of 7050-T7451 Aluminum Alloy

Research on Johnson–Cook Constitutive Model of γ-TiAl Alloy with Improved Parameters

Mechanical properties and JC constitutive modification of tungsten alloys under high strain rates and high/low temperatures

Modified Johnson-Cook Constitutive Model for Dynamic Compressive Behaviors of C250 Maraging Steel at Different Temperatures

Modification of strain rate strengthening coefficient for Johnson-Cook constitutive model of Ti6Al4V alloy

A Modified Constitutive Model and Microstructure Characterization for 2195 Al-Li Alloy Hot Extrusion

Optimization of Milling Aluminum Alloy 6061-T6 using Modified Johnson-Cook Model

The dynamic compressive behavior and constitutive models of a near α TA23 titanium alloy

Constitutive behavior of as-cast A356

A Modified Johnson–Cook Model for Modeling AA6061-T6 under Different Temperatures Considering Ductile Fracture

Machine learning-based modeling of the coupling effect of strain rate and temperature on strain hardening for 5182-O aluminum alloy

Stress-Strain Curves and Modified Material Constitutive Model for Ti-6Al-4V over the Wide Ranges of Strain Rate and Temperature

Research on High-Temperature Constitutive Relationship of Aluminum Alloy

Dynamic Mechanical Behavior and Modified Johnson-Cook Model of Ti60 Alloy under High-temperature and High-strain-rate Conditions